492644
66
Zoom out
Zoom in
Previous page
1/128
Next page
Appendix
En-66
The AV receiver allows you to update the firmware using a
USB device.
Note
Never unplug or turn off the AV receiver during the update
process.
Never plug or unplug an HDMI cable or a USB device during the
update process.
Never unplug the USB storage device containing the firmware
file or the AC power cord during the update process.
Do not attempt to access the AV receiver from your PC while it
is being updated.
It takes up to 10 minutes to complete the firmware update.
The AV receiver will retain all your settings after the update is
finished.
Before you start
•Set theHDMI Ctrl (RIHD)” setting to “Off
( page 49).
Turn off the controller device connected via Ethernet
cable.
Turn off Multi Zone if this function is present.
Stop playback of contents from Internet Radio,
iPod/iPhone, USB or servers, etc.
If there is any data in the USB device, remove it first.
Update procedure
Updating the Firmware via USB
1
Connect a USB device to your PC. If there is any
data in the USB device, remove it first.
2
Download the firmware file from the Onkyo web
site. The file name is as follows:
ONKAVR****_************.zip
Unzip the downloaded file. The following three files
are created:
ONKAVR****_************.of1
ONKAVR****_************.of2
ONKAVR****_************.of3
3
Copy the extracted files to the USB device. Be
careful not to copy the zip file.
4
Remove the USB device from your PC and connect
it to the USB port on the AV receiver.
5
Make sure the AV receiver and TV are turned on.
If the AV receiver is in standby mode, press
8ON/STANDBY on the AV receiver to light up the
front display.
6
Select the USB input source.
Now Initializing...” appears on the AV receiver’s
display and then the name of the USB device is
displayed. It takes 20 to 30 seconds to recognize the
USB device.
7
Press RECEIVER followed by HOME on the remote
controller.
The Home menu appears on the TV screen.
8
Select “F/W Update” and press ENTER.
9
Select “Update via USB” and press ENTER.
10
Select “Update” and press ENTER.
The update process will begin.
During the update process, the on-screen display may
disappear depending on the updated program. When
this occurs, you can still view the update progress on
the AV receiver’s display. The on-screen display will
reappear after the update is complete, and upon
turning the AV receiver off and on again.
Do not turn off the AV receiver and do not remove the
USB device during the update process.
11
The message “Completed!” appears on the AV
receiver’s display, indicating that the update has
been completed.
Remove the USB device.
12
Turn off the AV receiver using 8ON/STANDBY on
the front panel.
Do not use 8RECEIVER on the remote controller.
Once turned off, the AV receiver will automatically
turn on again.
Congratulations! You now have the latest firmware
installed on your Onkyo AV receiver.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR414 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR414

Onkyo TX-NR414 Quick start guide - English - 4 pages

Onkyo TX-NR414 Quick start guide - German - 4 pages

Onkyo TX-NR414 User Manual - German - 124 pages

Onkyo TX-NR414 Quick start guide - Dutch - 4 pages

Onkyo TX-NR414 User Manual - Dutch - 124 pages

Onkyo TX-NR414 User Manual - French - 4 pages

Onkyo TX-NR414 User Manual - French - 128 pages

Onkyo TX-NR414 User Manual - Italian - 4 pages

Onkyo TX-NR414 User Manual - Italian - 124 pages

Onkyo TX-NR414 User Manual - Swedish - 4 pages

Onkyo TX-NR414 User Manual - Swedish - 124 pages

Onkyo TX-NR414 User Manual - Spanish - 4 pages

Onkyo TX-NR414 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info