492644
65
Zoom out
Zoom in
Previous page
1/128
Next page
Appendix
En-65
Update procedure Troubleshooting
Case 1:
If “No Update” is displayed on the AV receiver’s display,
it means that the firmware has already been updated. You
do not need to do anything further.
Case 2:
If an error occurs, “Error!! *-**” is displayed on the AV
receiver’s display. (Alpha-numeric characters on the front
display are denoted by asterisks.) Refer to the following
table and take appropriate action.
Errors during an update via network
Case 3:
If an error occurs during the update process, disconnect
then reconnect the AC power cord and try again.
Case 4:
If an error occurs due to a wrong selection of input sources,
turn off and on the AV receiver. Then retry the update.
Case 5:
If you do not have an Internet connection to the network,
please contact Onkyo Support ( page 67).
1
Press RECEIVER followed by HOME on the remote
controller.
The Home menu appears on the TV screen.
2
Select “F/W Update” and press ENTER.
Note that the “F/W Update” option will be grayed out
for a short while after the AV receiver is turned on.
Please wait until it becomes operable.
3
Select “Update via NET” and press ENTER.
4
Select “Update” and press ENTER.
The update process will begin.
During the update process, the on-screen display may
disappear depending on the updated program. When
this occurs, you can still view the update progress on
the AV receiver’s display. The on-screen display will
reappear after the update is complete, and upon
turning the AV receiver off and on again.
5
The message “Completed!” appears on the AV
receiver’s display, indicating that the update has
been completed.
6
Turn off the AV receiver using 8ON/STANDBY on
the front panel.
Do not use 8RECEIVER on the remote controller.
Once turned off, the AV receiver will automatically
turn on again.
Congratulations! You now have the latest firmware
installed on your Onkyo AV receiver.
Error Code Description
*
-10,
*
-20
The Ethernet cable was not detected.
Reconnect the cable properly.
*
-11,
*
-13,
*
-21,
*
-28
Internet connection error.
Check the following items:
Make sure the IP address, subnet mask,
gateway address, and DNS server are
configured properly.
Make sure the router is turned on.
Make sure the AV receiver and the router are
connected with an Ethernet cable.
Make sure your router is configured properly.
See the instruction manual of the router.
If your network allows only one client
connection and there is any other device
already connected, the AV receiver will not be
able to access the network. Consult your
Internet Service Provider (ISP).
If your modem does not function as a router,
you will need a router. Depending on your
network, you may need to configure the proxy
server if necessary. See the document
provided by your ISP. If you are still unable to
access the Internet, the DNS or proxy server
may be temporarily down. Contact your ISP.
Others Retry the update procedure from the beginning.
If the error persists, please contact Onkyo
Support ( page 67) and provide the error
code.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR414 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR414

Onkyo TX-NR414 Quick start guide - English - 4 pages

Onkyo TX-NR414 Quick start guide - German - 4 pages

Onkyo TX-NR414 User Manual - German - 124 pages

Onkyo TX-NR414 Quick start guide - Dutch - 4 pages

Onkyo TX-NR414 User Manual - Dutch - 124 pages

Onkyo TX-NR414 User Manual - French - 4 pages

Onkyo TX-NR414 User Manual - French - 128 pages

Onkyo TX-NR414 User Manual - Italian - 4 pages

Onkyo TX-NR414 User Manual - Italian - 124 pages

Onkyo TX-NR414 User Manual - Swedish - 4 pages

Onkyo TX-NR414 User Manual - Swedish - 124 pages

Onkyo TX-NR414 User Manual - Spanish - 4 pages

Onkyo TX-NR414 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info