492661
73
Zoom out
Zoom in
Previous page
1/168
Next page
Advanced Operations
En-73
Center Width
` 0 to 3
to 7
With this setting, you can adjust the width of the sound
from the center speaker when using the Dolby Pro Logic
IIx Music listening mode. Normally, if you’re using a
center speaker, the center channel sound is output from
only the center speaker. (If you’re not using a center
speaker, the center channel sound will be distributed to the
front left and right speakers to create a phantom center).
This setting controls the front left, right, and center mix,
allowing you to adjust the weight of the center channel
sound.
PL IIz Height Gain
` Low
` Mid
` High
The Height Gain Control in Dolby Pro Logic IIz enables
the listener to select how much gain is applied to the front
high speakers. There are three settings, “Low”, “Mid” and
High”, and the front high speakers are accentuated in that
order. While “Mid” is the default listening setting, the
listener may adjust the Height Gain Control to their
personal preference.
Note
If the “Front High” setting is set to “None” ( page 67), this
setting cannot be selected.
Dolby EX
` Auto:
If the source signal contains a Dolby EX flag, the
Dolby EX or THX Surround EX listening mode is
used.
` Manual
:
You can select any available listening mode.
This setting determines how Dolby EX encoded signals are
handled. This setting is unavailable if no surround back
speakers are connected. This setting is effective with
Dolby Digital, Dolby Digital Plus and Dolby TrueHD only.
Note
If the “Surround Back” setting is set to “None” ( page 67),
this setting cannot be selected.
If the “Powered Zone 2/3” setting is set to “Yes” and Zone 2 is
turned on, this setting cannot be selected.
When the Speakers Type(Front A)” setting is set to “Bi-Amp
or “Digital Crossover”, this setting cannot be selected if the
Powered Zone 2” setting is set to “Yes” and Zone 2 is turned
on.
If the “Front High” or “Front Wide” setting is enabled
( page 67), this setting is fixed to “Manual”.
TrueHD Loudness Management
` Off
` On
This setting specifies whether or not to apply the Late
Night processing on a Dolby TrueHD source.
Note
When this setting is set to “Off”, the Late Night function for
Dolby TrueHD sources is automatically fixed to “Off”.
When this setting is set to “Off”, the Dialogue Normalization
information is not available for Dolby TrueHD sources.
Dolby Volume
` Off
` On
Dolby Volume automatically adjusts the difference in
volume levels which can occur between different contents
or source components, freeing the user from having to
make volume adjustments. Also, by adjusting the
frequency balance according to the playback volume, it
recreates the original source audio. Dolby Volume
therefore provides comfortable listening, effectively
controlling the volume level difference without unnatural
changes in volume or sound quality to recreate the balance
and nuance of the source audio.
Note
When the “Dolby Volume” setting is set to “On”,
Dynamic EQ” and “Dynamic Volume” will be set to “Off”.
If you would like to use Dolby Volume in THX listening modes,
set the “Loudness Plus” and “Preserve THX Settings” settings
to “Off” and “No”, respectively.
When “Dolby Volume” is set to “On”, the Late Night function
cannot be set.
Volume Leveler
` Off
` Low:
Low Compression Mode activated.
` Mid:
Medium Compression Mode activated.
` High
:
High Compression Mode activated. This setting
affects volume the most, causing all sounds to be of
equal loudness.
Volume Leveler” maintains the perceived loudness of all
contents, coming from different channels or input sources.
Note
If the “Dolby Volume” setting is set to “Off”, this setting cannot
be selected.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR3010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR3010

Onkyo TX-NR3010 User Manual - German - 168 pages

Onkyo TX-NR3010 User Manual - Dutch - 168 pages

Onkyo TX-NR3010 User Manual - French - 168 pages

Onkyo TX-NR3010 User Manual - Italian - 168 pages

Onkyo TX-NR3010 User Manual - Swedish - 168 pages

Onkyo TX-NR3010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info