Manual Onkyo TX-NR1008 (page 49 of 104) (English)

553762

Zoom out

Zoom in

1/104

Equalizer Settings

With the Equalizer settings, you can adjust the tone of

speakers individually with a 7-band equalizer. The volume

of each speaker can be set (➔ 48).

■ Equalizer

` Manual:

You can adjust the equalizer for each speaker manu-

ally. If you selected “Manual”, continue with this

procedure.

` Audyssey:

This is selected automatically by Audyssey MultEQ

Room Correction and Speaker Setup function. The

Audyssey indicator will light (➔ 9) and

“Dynamic EQ” and “Dynamic Volume” become

available (➔ 52).

` Off

Tone off, response flat.

THX Audio Setup

With the “Surr Back Speaker Spacing” setting, you can

specify the distance between your surround back speakers.

If you’re using a THX-certified subwoofer, set the “THX

Ultra2/Select2 Subwoofer” setting to “Ye s”. You can

then apply THX’s Boundary Gain Compensation (BGC)

to compensate the perceived exaggeration of low frequen-

cies for listeners sitting very close to a room boundary

(i.e., wall).

You can also set the THX Loudness Plus. When the

“Loudness Plus” is set to “On”, it is possible to enjoy

even subtle nuances of audio expression at low volume.

This result is only available when the THX listening mode

is selected.

■ Surr Back Speaker Spacing

` < 1ft (< 0.3m):

Select this if your surround back speakers are

between 0 and 1 foot (0–30 cm) apart.

` 1ft - 4ft (0.3m - 1.2m):

Select this if your surround back speakers are

between 1 and 4 feet (0.3–1.2 m) apart.

` > 4ft (> 1.2m)

Select this if your surround back speakers are more

than 4 feet (1.2 m) apart.

Note

• Cannot be set if “Surr Back Ch” is set to “1ch” (➔ 48),

“Speakers Type(Front)” is set to “Bi-Amp” (➔ 47), “Surr

Back” is set to “None” (➔ 47), or Powered Zone 2 is being used

(➔ 75).

■ THX Ultra2/Select2 Subwoofer

` No

Select this if you do not have a THX-certified sub-

woofer.

` Ye s:

Select this if you have a THX-certified subwoofer.

Note

• If the “Subwoofer” setting is set to “No”, this setting cannot be

selected (➔ 47).

■ BGC

` Off:

Select this to turn off BGC.

` On

Select this to turn on BGC.

Note

• This setting is only available if “THX Ultra2/Select2 Sub-

woofer” is set to “Ye s ”.

■ Loudness Plus

` Off:

Select this to turn off Loudness Plus.

` On

Select this to turn on Loudness Plus.

This setting is set automatically by Audyssey MultEQ

Room Correction and Speaker Setup function (➔ 29).

Press w to select “Channel”, and then use e/

r to select a speaker.

Use q/w to select a frequency, and then use

the e/r to adjust the level at that frequency.

The volume at each frequency can be adjusted

from –6dB to 0dB

to +6dB in 1 dB steps.

Note

• You can select: “63Hz”, “160Hz”, “400Hz”,

“1000Hz”, “2500Hz”, “6300Hz”, or “16000Hz”.

And for the subwoofer, “25Hz”, “40Hz”, “63Hz”,

“100Hz”, or “160Hz”.

• While the Direct or Pure Audio listening mode is

selected, the equalizer settings have no effect.

Tip

• Low frequencies (e.g., 63Hz) affect bass sounds;

high frequencies (e.g., 16000Hz) affect treble

sounds.

Use q to select “Channel”, and then use e/r

to select another speaker.

Repeat steps 1 and 2 for each speaker.

You cannot select speakers that you set to “No”

or “None” in the “Speaker Configuration”

(➔ 47).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1008 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1008

Onkyo TX-NR1008 User Manual - German - 204 pages

Onkyo TX-NR1008 User Manual - Dutch - 204 pages

Onkyo TX-NR1008 User Manual - French - 208 pages

Onkyo TX-NR1008 User Manual - Italian - 204 pages

Onkyo TX-NR1008 User Manual - Swedish - 204 pages

Onkyo TX-NR1008 User Manual - Spanish - 208 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-NR1008 Manual

Product: