553762

Onkyo TX-NR1008 Manual

29
Zoom out
Zoom in
Previous page
1/104
Next page
29
En
With the supplied calibrated microphone,
Audyssey MultEQ automatically determines the number
of speakers connected, their size for purposes of bass man-
agement, optimum crossover frequencies to the subwoofer
(if present), and distances from the primary listening posi-
tion.
Audyssey MultEQ then removes the distortion caused by
room acoustics by capturing room acoustical problems
over the listening area in both the frequency and time
domain. The result is clear, well-balanced sound for every-
one. Enabling Audyssey MultEQ allows you to also use
Audyssey Dynamic EQ
®
, which maintains the proper
octave-to-octave balance at any volume level (➔ 52).
Before using this function, connect and position all of
your speakers.
If “Dynamic EQ” is set to “On” (➔ 52), the “Equalizer”
setting will be set to “Audyssey” (➔ 49). On the other
hand, if it is set to “Off”, the “Dynamic Volume” setting
will be set to “Off” (➔ 52).
It takes about 30 minutes to complete Audyssey MultEQ
Room Correction and Speaker Setup for 6 positions. Total
measurement time varies depending on the number of
speakers.
Using Audyssey MultEQ
Using Audyssey MultEQ to create a listening environment
in your home theater that all listeners will enjoy,
Audyssey MultEQ takes measurements at up to six posi-
tions within the listening area. Position the microphone at
ear height of a seated listener with the microphone tip
pointed directly at the ceiling using a tripod. Do not hold
the microphone in your hand during measurements as this
will produce inaccurate results.
■ First measurement position
Also referred to as the Main Listening Position this
refers to the most central position where one would nor-
mally sit within the listening environment. MultEQ uses
the measurements from this position to calculate
speaker distance, level, polarity, and the optimum cross-
over value for the subwoofer.
■ Second−Sixth measurement positions
These are the other listening positions (i.e., the places
where the other listeners will sit). You can measure up
to 6 positions.
The following examples show some typical home theater
seating arrangements. Choose the one that best matches
yours, and position the microphone accordingly when
prompted.
Note
• Make the room as quiet as possible. Background noise and Radio
Frequency Interference (RFI) can disrupt the room measure-
ments. Close windows, televisions, radios, air conditioners, flu-
orescent lights, home appliances, light dimmers, or other
devices. Turn off the cell phone (even if it is not in use) or place
it away from all audio electronics.
• The microphone picks up test tones which played through each
speaker as Audyssey MultEQ Room Correction and Speaker
Setup run.
• Audyssey MultEQ Room Correction and Speaker Setup cannot
be performed while a pair of headphones is connected.
Audyssey MultEQ
®
Room Correction
and Speaker Setup
1
Turn on the AV receiver and the connected TV.
On the TV, select the input to which the AV receiver
is connected.
2
Set the speaker setup microphone at the Main Lis-
tening Position a, and connect it to the SETUP
MIC jack.
The speaker setting menu appears.
3
When you’ve finished making the settings, press
ENTER.
• If your front speakers are bi-amped, you must
select “Bi-Amp” in the “Speakers Type(Front)”
setting (➔ 47). For hookup information, see “Bi-
amping the Front Speakers” (➔ 15).
• If you change “Powered Zone2” or “Powered
Zone3” setting, refer to “Setting the Powered
Zone 2/3” for more details (➔ 75).
• If you are using a subwoofer(s), select “Yes” in the
“Subwoofer” (➔ 47). If not, select “No” and skip
step 4.
TV
def
cab
: Listening area
a to f: Listening position
Speaker setup microphone
SETUP MIC jack
MultEQ: Auto Setup
Speakers Type(Front)
Powered Zone2
Powered Zone3
Subwoofer
Normal
Not Act
Not Act
Yes
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR1008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1008 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1008

Onkyo TX-NR1008 User Manual - German - 204 pages

Onkyo TX-NR1008 User Manual - Dutch - 204 pages

Onkyo TX-NR1008 User Manual - French - 208 pages

Onkyo TX-NR1008 User Manual - Italian - 204 pages

Onkyo TX-NR1008 User Manual - Swedish - 204 pages

Onkyo TX-NR1008 User Manual - Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info