645294
45
Zoom out
Zoom in
Previous page
1/63
Next page
45
Advanced Operation
—Continued
The DVD multichannel input is for connecting a compo-
nent with individual 5.1-channel analog audio outputs,
such as a DVD player or MPEG decoder.
See “DVD Multichannel Connection” on page 24 for
hookup details.
This section explains how to select the DVD multi-
channel input for playback.
Notes:
When the DVD multichannel input (Multi) is selected,
the Multichannel Direct (MLT Direct) listening mode
is selected.
While the DVD multichannel input is selected, the
Speaker Configuration settings on page 48 are
ignored, and signals from the multichannel input are
fed to the front left, front right, center, surround left,
and surround right speakers and subwoofer regardless
of those settings.
Adjusting the Volume of Individual
Speakers for the Multichannel Input
While using the multichannel input, you can adjust the
volume of individual speakers.
Note:
•You cannot select speakers that are set to No or Non
on the Speaker Configuration menu (see page 48).
These settings are not the same as those in “Speaker
Level Calibration (Test Tone)” on page 30.
These settings affect only the DVD multichannel input
and have no effect on the other inputs.
Using the DVD Multichannel Input
1
Press the INPUT SELECTOR
[DVD] button.
The input source changes to DVD.
2
Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
The DVD multichannel input needs to
be selected in the setup menus.
3
Use the Up and Down [ ]/[ ]
buttons to select “4. Input Set,
and then press [ENTER].
4
Use the Up and Down [ ]/[ ]
buttons to select “Audio, and
then use the Left and Right [ ]/
[] buttons to select “Multi.
5
Press the [SETUP] button.
The setup menu closes.
6
Start playback on your DVD
player.
DVD
AMP
TUNER
ENTER
ENTER
ENTER
1
Press the REMOTE MODE [AMP]
button, and then use the [CH
SEL] button to select each
speaker.
Speakers are selected in the following
order.
2
Use the [LEVEL–] and [LEVEL+]
buttons to adjust the volume.
The volume can be adjusted from –12
to +12 (–30 to +12 for the subwoofer).
AMP
TUNER
CH SEL
Front left Center Front right
Surr right
Surr left
Subwoofer
LEVEL LEVEL
+
-
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-L55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-L55 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info