553753
40
Zoom out
Zoom in
Previous page
1/64
Next page
40
Setup menus
2-4. IntelliVolume sub-menu
a. IntelliVolume
When switching input sources, you may find that the output level for
different components or input sources connected to the TX-DS696 is
different even though the main volume setting is the same. Under
normal circumstances, you would then have to change the volume
setting each time you change the input source. This IntelliVolume
sub-menu allows you to preset a volume level for each input source
separately so that when you do switch from one input source to
another, the TX-DS696 adjusts the volume accordingly so that the
resulting volume stays the same. To set the IntelliVolume, simply
select an input source at the front panel, and if that source is quieter
than other sources, increase its decibel level with the
cursor
button, or if it is louder than other sources, decrease its decibel level
with the
cursor button.
The IntelliVolume can be adjusted between 12 and +12 decibels.
Input source signal (display) Analog/PCM Source Digital Format
Type of media Tape, CD, DVD,
Record, Tuner Digital satellite broadcast,
DVD Video (PCM), LD (PCM) DTS-CD
Digital satellite broadcast Dolby Digital 2ch Source DTS,
All excluding
Listening Mode Dolby Digital 2ch
Direct
Stereo ●●
Surround Pro Logic II (Movie) ●●
Pro Logic II (Music) ●●
Dolby Digital
DTS
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
Relationship between input source and listening mode
Notes:
The listening modes that can be set are different for each input source format.
You may not be able to select all the listening modes shown here depending on your speaker
configuration or the selected input source.
2-3. Listening Mode Preset sub-menu
With the TX-DS696, you can set a different listening mode for each
different signal type that comes from each input source and also set
the parameters for the listening mode itself. For example, if your
DVD player also plays compact discs and the DVD video signal is
DTS and the compact disc signal is PCM, then you can set a different
listening mode for each.
This is especially convenient if you frequently play the same types of
movies or music.
Input source signals
a. Analog/PCM Source
Set a listening mode for the input signal from analog sources and
PCM sources.
Note:
For PCM sources recorded at a sampling rate of 96 kHz or greater,
only the Stereo or Direct listening modes can be selected. However,
the set listening mode is stored in memory.
b. Digital Format
Set a listening mode for the input signal from Dolby Digital and DTS
sources.
The TX-DS696 will automatically switch to the listening mode
set for the current input signal. For example, even when using
the same DVD player, if a CD is played, the listening mode
automatically becomes Stereo, and if a DVD is played (Dolby
Digital 3/2.1), the listening mode automatically becomes Dolby
D.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info