553753
39
Zoom out
Zoom in
Previous page
1/64
Next page
39
Setup menus
2-1. Audio Setup sub-menu
The settings made in this sub-menu are valid for the input source that
is currently selected with the input source buttons at the front panel
and, therefore, these settings are made separately for each digital
input source. This sub-menu will not appear if the selected input
source button is AM or FM. If this setting is incorrectly made, the
digital audio signals may not be properly output, or not heard at all.
a. Digital Input
This setting tells the TX-DS696 which input source button on the
front panel is connected with which digital input jack on the rear
panel. To perform this setting, you must first select a digital input
source at the front panel and then set the name of the digital input
jack it is connected to here.
For example, if the input source selected at the front panel is CD and
the compact disc player is connected to DIGITAL INPUT
(OPTICAL) 1, then select OPT1 here. If the input source selected
is not connected to a digital input, then select ----.
OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1.
OPT2: Select if connected to DIGITAL INPUT (OPTICAL) 2.
COAX1: Select if connected to DIGITAL INPUT (COAXIAL) 1.
COAX2: Select if connected to DIGITAL INPUT (COAXIAL) 2.
----: Select if the input source is not from a digital input jack.
Note:
Do not assign a digital input to more than one input source. If you are
making a digital connection that requires you to change the default
settings, be sure to always first cancel the current digital input setting
and then assign the new setting.
b. Multichannel
This sub-menu will not appear if AM or FM is selected at the front
panel for the input source. The initial settings are Yes for the DVD
input source and No for all other input sources. This setting is
normally set to No, and only needs to be changed to Yes if a
DVD player, MPEG decoder, or other component that has a multi
channel port is connected to the MULTI CHANNEL INPUT port for
5.1-channel audio. For example, if a DVD player is connected to the
MULTI CHANNEL INPUT port, then select DVD at the front panel
as the input source, bring up this sub-menu, and select Yes for the
Multichannel setting. You can only select Multichannel with the
AUDIO SELECTOR button when Yes is selected here.
Note:
When playing a device that is actually connected to the MULTI
CHANNEL INPUT terminal, select Multichannel with the AUDIO
SELECTOR button.
Input source selected Component video input
DVD INPUT 1
VIDEO1 INPUT 2
VIDEO2 INPUT 1
VIDEO 3 INPUT 1
VIDEO 4 INPUT 1
----: Available for digital input but not set in initial settings.
: Not available for digital input.
Initial settings for each input source
Input source Digital input Multichannel
DVD COAX 1 Yes
VIDEO1 COAX 2 No
VIDEO2 ---- No
VIDEO 3 OPT2 No
VIDEO 4 ---- No
TAPE ---- No
FM
AM
PHONO ---- No
CD OPT 1 No
2-2. Video Setup sub-menu
a. Component Video
If a component is connected to the one of the COMPONENT
VIDEO inputs (1 or 2), then that input must be set here. This setting
will not appear if AM, FM, PHONO, CD or TAPE is selected as the
input source.
The default settings are given below.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info