553753
24
Zoom out
Zoom in
Previous page
1/64
Next page
24
Speaker setup
About the other settings
The factory settings for your TX-DS696 are given in the table on
page 12. If you connect your system in accordance with these factory
settings, there is no need to change them. However, if you do not,
you will need to change the settings that do not match. If you do not,
signals may not be properly received resulting in poor sound or
image quality, no digital output, or no output at all.
Changing a digital input setting:
1. Press the input selector button for the source that
you want to change.
2. Press the SETUP button.
3. Turn the jog dial to display 2. Input Setup.
4. Press the jog dial.
Audio Setup? appears.
5. Press the jog dial again.
D.Input: xxx appears.
6. Turn the jog dial and select the connector to which
the digital source is connected.
7. Press RETURN repeatedly or press SETUP to exit the
setting mode.
Changing the multichannel setting:
1. Press the input selector button for the source that
you want to change.
2. Press the SETUP button.
3. Turn the jog dial to display 2. Input Setup.
4. Press the jog dial.
Audio Setup? appears.
5. Press the jog dial twice.
Multich: xxx appears.
6. Turn the jog dial to select Yes or No.
7. Press RETURN repeatedly or press SETUP to exit the
setting mode.
Changing the Component Video Input setting:
1. Press the input selector button for the source that
you want to change.
2. Press the SETUP button.
3. Turn the jog dial to display 2. Input Setup.
4. Press the jog dial.
Audio Setup? appears.
5. Turn the jog dial to display Video Setup?
6. Press the jog dial.
Cmponent: xxx appears.
7. Turn the jog dial to select the connectors to which
the source is connected (Input 1 or Input 2).
8. Press RETURN repeatedly or press SETUP to exit the
setting mode.
Level Calibration submenu
This submenu allows you to set the volume levels of each speaker
individually so that they all sound at the same level when heard from
the listening position. If you are continuing from setting the speaker
distances and are still in the setting mode, skip directly to step 2.
1. Press the SETUP button.
If a menu other than 1. Speaker Setup
appears, turn the jog dial until 1. Speaker
Setup does appear.
7. Press the RETURN button.
You return to the Level Cal? display.
Notes:
If you press the RETURN button again, you go back up one
more level.
To exit the setting mode immediately, press the SETUP button.
6. Repeat the procedure in step 4 and 5 until the volume
of the test sound from all speakers is the same level.
Each time you press the jog dial, the test sound will be heard
from a different speaker. The speaker order for calibration is
front left center front right surround right surround
left subwoofer.
4. Press the jog dial again.
The test sound will now be heard from a
different speaker.
3. Press the jog dial.
A test sound (pink noise) will be heard from
the left front speaker. At this point, it is not
necessary to adjust the volume of the test
sound.
2. Press the jog dial and then turn it to display the
Level Cal?
5. Turn the jog dial to adjust the
volume of the test sound from this
speaker to the same level that you
heard from the previous speaker.
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
SETUP
db
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info