553753
22
Zoom out
Zoom in
Previous page
1/64
Next page
22
Speaker setup
After you have installed the TX-DS696, connected all the
components, and determined the speaker layout, it is now time to
perform the settings in the Speaker Setup menu for the optimum
sound acoustics for your environment and speaker layout.
Before you perform the following settings, it is important that you
first determine the following characteristics:
The types and sizes of the speakers that are connected.
The distance from each speaker to your normal listening
position.
Before performing the settings, write down your speaker
settings in the diagram below for future reference.
SETUP
PUSH TO ENTER
DSP
/
MODE ADJ
Speaker Configuration submenu
This submenu provides settings that tell the TX-DS696 which
speakers you have connected and what size they are.
1. Press the SETUP button.
If a menu other than 1. Speaker Setup
appears, turn the jog dial until 1. Speaker
Setup does appear.
2. Press the jog dial.
PUSH TO ENTER
DSP
/
MODE ADJ
3. Press the jog dial.
4. Turn the jog dial to set whether or
not a subwoofer is connected.
Yes: Select when a subwoofer is connected.
No: Select when a subwoofer is not
connected.
PUSH TO ENTER
DSP
/
MODE ADJ
SL SR
Front
a.
meters / feet
b. [ ]
m/ft
c. [ ]
m/ft
d. [ ]
m/ft
Front
SW Center
b c b
dd
Monitor
Your speaker settings:
Buttons to be used
Setup button:
Press to enter the main menu level and put the TX-
DS696 in the mode for setting the various parameters.
If currently in the setting mode, press to exit.
Jog dial:
If the indicators directly above and below the jog dial
are lit, turning the jog dial selects a submenu and
pushing the jog dial enters the selected submenu (i.e.
takes you one level down).
If the indicators directly to the left and right of the jog
dial are lit, turning the jog dial changes the setting of
the currently selected parameter and pushing the jog
dial displays the next parameter.
RETURN button:
Press to go back one level up.
Use the buttons on the TX-DS696 to navigate through the menus and
set the various settings and parameters according to your system
setup and layout.
SETUP
RETURN
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
The normal order for performing the settings for speaker setup in
your TX-DS696 is to set the speaker configuration settings first, set
the speaker distances second, and then calibrate the speaker levels
third. Below is an explanation of how to perform these settings using
the controls on the TX-DS696.
You can also perform these settings using the On-Screen Display
(OSD) menu (see page 34).
The settings are in a hierarchical configuration as shown below.
Level 1 Main menu level
The level consisting of the menus contained in the Setup menu.
Level 2 Menu level
The level consisting of the submenus contained in each menu.
Level 3 Submenu level
The level consisting of the parameters contained in each submenu.
STANDBY/ON
STANDBY
OFF
ON
POWER
MASTER VOLUME
BASS
TREBLE
AV
RECEIVER
TX
-
DS
696
PHONES
FM AM PHONO C
DTAPEDVD
REC OUT
ZONE
2
ZONE
2
LEVEL
CH LEVEL
VIDEO
3
VIDEO
4
VIDEO
2
VIDEO
1
VCR
2
VCR
1
AUDIO
SELECTOR
TUNING PRESET
SMART
SCAN
NAVIGATOR
PRESET MEMORY
FM
MODEDISPLAY DIMMER
PUSH TO ENTER
DSP
/
MODE ADJ
SETUP
RETURN
SETUP
RETURN
Jog dial
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info