462128
33
Zoom out
Zoom in
Previous page
1/40
Next page
En-33
iPod/iPhone Playback via Onkyo Dock
UP-A1 Dock
With the UP-A1 Dock, you can easily play the music
stored on your Apple iPod/iPhone through the receiver
and enjoy great sound.
You can use the receiver’s remote controller to operate
your iPod/iPhone.
System Function
Auto Power On
If you start iPod/iPhone playback while the receiver
is on Standby, the receiver will automatically turn on
and select your iPod/iPhone as the input source.
Direct Change
If you start iPod/iPhone playback while listening to
another input source, the receiver will automatically
select your iPod/iPhone as the input source.
Using the receiver’s Remote Controller
You can use the receiver’s remote controller to
control basic iPod/iPhone functions (
page 34).
Using Your iPod/iPhone model’s Alarm Clock
You can use your iPod/iPhone model’s Alarm Clock
function to automatically turn on your iPod/iPhone and
the receiver at a specified time. The receiver’s input
source will automatically be set to PORT.
Notes:
To use this function, your iPod/iPhone must be in the
UP-A1 Dock, and the UP-A1 Dock must be connected
to the receiver.
When you use this function, be sure to set the
receiver’s volume control to a suitable level.
When Zone 2 is turned on, you can’t use this function.
You cannot use this function for sound effects on your
iPod/iPhone.
Charging Your iPod/iPhone model’s Battery
The UP-A1 Dock charges your iPod/iPhone model’s 
battery while your iPod/iPhone is in the UP-A1 Dock 
connected to the receiver. While your iPod/iPhone is
seated in the UP-A1 Dock, its battery will be charged 
when the receiver is set to On or Standby.
You can specify how the power is fed to your iPod/iPhone
when the receiver is in Standby Mode.
Note:
When a UP-A1 Dock with an inserted iPod/iPhone is
connected, the power consumption on standby mode
slightly increases.
Status Messages
If none of the following messages are displayed on the
receiver’s display, check the connection to your iPod/
iPhone.
PORT Connecting
The receiver is checking the connection with the
dock.
PORT Not Support
The receiver do not support the connected dock.
PORT UP-A1
UP-A1 Dock is connected.
Note:
The receiver displays the message “UP-A1” for several
seconds after recognizing the UP-A1.
Using the Onkyo Dock
Dock is sold separately. Models sold are different
depending on the region.
For the latest information on Onkyo Dock
components, see the Onkyo web site at:
http://www.onkyo.com
Before using an Onkyo Dock, update your iPod/
iPhone with the latest software, available from the
Apple web site.
For supported iPod/iPhone models, see the instruction
manual of the Onkyo Dock.
The receiver may take several seconds to start up, so
you might not hear the first few seconds of the first
song.
Operating Notes
Functionality depends on your iPod/iPhone model
and generation.
Before selecting a different input source, stop iPod/
iPhone playback to prevent the receiver from
selecting the iPod/iPhone input source by mistake.
If any accessories are connected to your iPod/
iPhone, the receiver may not be able to select the
input source properly.
While your iPod/iPhone is in the UP-A1 Dock, its
volume control has no effect. If you adjust your
iPod/iPhone model’s volume control while it’s in the
UP-A1 Dock, make sure it’s not set too high before
you reconnect your headphones.
The Auto Power On function will not work if you set
your iPod/iPhone in the UP-A1 Dock while it is
playing.
When Zone 2 is turned on, you can’t use Auto Power
On and Direct Change functions.
Do not turn off the power with the iPod/iPhone still
connected to this unit via the UP-A1 Dock.
Set your iPod/iPhone in the UP-A1 Dock after the
receiver turns on.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-8030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-8030 in the language / languages: English as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-8030

Onkyo TX-8030 User Manual - German - 80 pages

Onkyo TX-8030 User Manual - Dutch - 80 pages

Onkyo TX-8030 User Manual - French - 80 pages

Onkyo TX-8030 User Manual - Italian - 80 pages

Onkyo TX-8030 User Manual - Swedish - 80 pages

Onkyo TX-8030 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info