608263
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
1
Recording
Confirm that the amplifier is set up
correctly for recording. (Refer to the
amplifier’s instruction manual for details.)
1. Insert the cassettes.
Make sure the side to be recorded is
facing outward.
Recording is not possible on the tape
leaders (the transparent sections you
see at both ends of the tape.)
2. Prepare the source component to be
used for the recording.
Tune in the desired station on the tuner.
Load a CD (or LP) into the CD player
(or turntable).
Load a cassette into the tape player
(analog or DAT).
3. Set the Dolby NR by pressing the
DOLBY NR button repeatedly until
the desired Dolby NR indicator
(OFF, B or C) turns on.
4. Set the Reverse Mode by pressing the
REVERSE MODE button repeatedly
until the desired mode is displayed.
(
v ) one side: Only one side of the
tape is recorded.
( b ) repeat: Both sides of the tape are
recorded.
5. Press the COUNTER A/B button
repeatedly until
B
is displayed, and
press the COUNTER RESET button
to return the tape counter to [0000].
6. Begin playing the source component.
7. Press the t button.
8. While observing the peak level
indicators, adjust the recording level.
The recording levels of the left and
right channels are adjusted simultane-
ously.
Use the REC LEVEL knob to adjust the
recording level.
When using metal cassettes, the REC
LEVEL knob should be adjusted so that
+3 dB indicators light periodically.
When using other kinds of tapes, the 0
dB indicator should light periodically.
(See “Making good sound recordings”
on page 9.)
2
3
5
s
4
6
7
DECK-B
PLAY
B
REC PAUSE
DECK-B
PLAY
B
8
Recording
Recording can be performed on Deck B only. High-speed recording is not possible when recording from the LINE IN (REC) jacks.
Check to see if one or both of the cassette’s erasure prevention tabs have been removed. (Refer to page 13 for details)
Confirm that the cassette deck is properly connected to the amplifier.
Illustrations enclosed in solid boxes indicate source component operations.
34 7 5 1
89
ONKYO
DOLBY NR
REVERSE MODE
COUNTER
RESET
A/B
REC LEVEL
MIN
MAX
L
R
dB -20- -10 -6 -3 +30+6
t
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TA-RW244 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TA-RW244 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info