608263
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Recheck the tape direction settings (shown
by the Deck A and Deck B direction
indicators) before pressing the d or f
button.
The following explanation assumes that the
tape direction is forward ( s ).
Fast forward and rewind
To fast forward the tape, press the f
button.
To rewind the tape, press the d button.
To stop either fast forward or rewind, press
the e button.
It is always important to press the e button
before the f or d buttons are used
while the tape transport is active. This
helps to reduce performance problems. (or
to ensure long life and better performance
from your new cassette deck we advice
that:)
Automatic tape selection system
This deck automatically detects the type of
cassette in the cassette holder and sets the
bias and equalization to the correct settings.
Tape selection is performed by detecting the
presence or absence of identification pits on
the back of the cassette shell. Cassettes
manufactured before this identification
system was adopted and bargain cassettes
that do not incorporate these pits cannot be
used with this deck.
A
A
A
A
A
A
A
A
To play a tape
Continuous tape playback
Insert the cassettes you wish to play in
Deck A and Deck B. Set the reverse mode
to b . Press the a or s button of
either Deck A or Deck B.
Both sides of both cassettes will play back,
one after the other, and then the process
will repeat. After four complete playback
cycles, playback stops automatically.
Be sure to select the same Dolby NR
system on both Deck A and Deck B.
Recording to both sides of a tape
(Deck B)
Insert the cassette you wish to record in
Deck B. Set the reverse mode to b . Press
the t button followed by the s button
of Deck B to start recording from the front
side.
Both sides of the cassette are recorded.
Then, the auto-stop mechanism will stop
the tape at the end of the reverse side.
If recording starts in the reverse
direction first, only the reverse side is
recorded, after which tape travel stops
automatically.
A
A
A
A
Reverse mode function
Recheck the tape travel direction settings (shown by the Deck A and Deck B direction indicators) before beginning playback or record-
ing.
The following explanation assumes that cassette side A is facing outward.
There is a silent gap about 10 seconds long when the direction of tape travel switches from forward to reverse or from reverse to
forward when the end of a tape side is reached.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TA-RW244 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TA-RW244 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info