370695
61
Zoom out
Zoom in
Previous page
1/68
Next page
61
Others
Causes
The power plug is disconnected.
There is external noise in the computer
circuits of the DVD Receiver.
The AC fuse is blown.
The muting function is activated.
The DVD Receiver is not properly
connected.
The amplifier protection circuitry has
activated. (The STANDBY indicator
flashes.)
A wrong sound signal conversion method
is selected.
The speakers are not properly connected.
The surround mode is set to “STEREO.
The volume level of the center speaker
(“CENTER”) is set to minimum.
The configuration of the center speaker
(“CENTER SPEAKER”) is set to “NONE.
The TV is not set to receive the output
signals from the DVD Receiver.
The video cable is not connected
securely.
Only S video connection is made.
The disc is dirty.
It is in fast forward or fast reverse
playback.
Another input source is selected.
Copy protection is activated.
Power supply fluctuations or other
abnormalities such as static electricity
may interrupt correct operation.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the disc tray
guide.
The disc is dirty.
The parental lock function is activated.
The DVD Receiver is in repeat playback
mode, memory playback mode, etc.
Remedies
Check the connection of the power cord.
Switch off the main power, then switch it
on again. If not recovered, disconnect the
power cord, then connect it again.
Contact your nearest ONKYO service
center.
Deactivate the muting function.
Check the connections to the DVD
Receiver.
Contact your nearest ONKYO service
center.
Check the current sound signal
conversion method, and select the right
one.
Check the speaker connections.
Select the appropriate surround mode.
Adjust the volume level of the center
speaker.
Set the configuration of the center
speaker to “LARGE” or “SMALL.
Set the TV to the DVD Receiver input.
Check the connections between the DVD
Receiver and TV set.
Make also video connection.
Eject the disc and clean it.
Sometime a small amount of picture
distortion may appear. This is not a
malfunction.
Select the appropriate input source.
Connect the DVD Receiver directly to the
TV. Avoid connecting the DVD Receiver to
the TV through a VCR.
Switch off the main power, then switch it
on again. If not recovered, disconnect the
power cord, then connect it again.
Insert a disc. (Check that “DVD,“VCD,” or
“CD” is lit in the DVD Receiver’s display.)
Check the playable discs.
Place the disc with the playback side
down.
Place the disc within the proper guide on
the disc tray.
Eject the disc and clean it.
Deactivate the parental lock function or
change the parental lock level.
These operations may prevent the original
progress of the contents.
Symptoms
The DVD Receiver doesn’t
switch on.
No sound is reproduced.
No sound or very little
sound is reproduced from
the center speaker.
No picture appears on the
TV screen. Or the picture
from the DVD Receiver
doesn’t appear on the TV
screen.
The playback picture is
occasionally distorted.
The sound of the playback
source is not heard.
Brightness is unstable or
noise is visible on playback
picture.
The buttons on the remote
controller and DVD
Receiver do not operate.
The DVD Receiver does
not start playback.
Playback doesn’t follow the
course of the disc’s
programs.
Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective
instruction manuals of the connected components and TV.
Pages
17
17
29
10 – 16
40, 41,
50, 59
12
31
19, 32
14
10
10, 11
9
28
17
10, 11
20
9
20
20
20, 9
44, 54
AmplifierDVD
Troubleshooting
Others
(Continued on next page.)
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dr 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dr 90 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info