370695
41
Zoom out
Zoom in
Previous page
1/68
Next page
41
Advanced DVD/VIDEO CD/
Audio CD Operation
Output sound conversion tables
Symbols in the tables
The symbols a and c are referred on the previous page and this page.
The symbols b, c, d, e, f, and g are referred on page 59 in “Recording Using the Connected Equipment.
Sound from the speakers
Sound signals from the Digital output connector and Analog output jacks
Discs
DVD
videos
Linear
PCM
Sound systems*
1
*
1
Some discs have more than one sound system and
can be selected (see page 39).
*
2
You can change the conversion method temporarily
as described on the previous page, or permanently
using the setting menu (see pages 44 and 50).
*
3
The digital signals will be converted through the D/A
(Digital-to-Analog) converter. When the digital signals
are being converted using higher frequency and
higher quantization, better analog signals will be
obtained.
Conversion methods*
2
VIDEO CDs
Audio CDs
DOLBY DIGITAL
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
96 kHz/16 bit
96 kHz/20bit
96 kHz/24 bit
DTS
MPEG1
Linear PCM 44.1 kHz/16 bit
DTS
Discs
DVD
videos
Linear
PCM
Bitstream
Bitstream
Bitstream
Sound systems*
1
96k Sound
Bitstream
48 kHz/16 bit
Bitstream
Conversion methods*
2
VIDEO CDs
Audio CDs
Bitstream
DOLBY DIGITAL
DTS
DTS
48 kHz/16 bit
Converted to 44.1 kHz/16 bit
48 kHz/16 bit
kHz/bit when converting Digital Signals to
Analog Signals for Analog jacks*
3
96k Sound
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
96 kHz/16 bit
96 kHz/20 bit
96 kHz/24 bit
PCM
Conversion methods*
2
Digital output signals from
the DIGITAL OUTPUT OPTICAL connector
48 kHz/16 bit 48 kHz/16 bit
No signal is
output.
Converted to 44.1 kHz/16 bit Converted in 44.1 kHz/16 bit
Converted in 44.1 kHz/16 bit
No signal
e
c
b
Bitstream
No Signal
Bitstream
DOLBY DIGITAL
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
96 kHz/16 bit
96 kHz/20 bit
96 kHz/24 bit
DTS
MPEG1
Linear PCM 44.1kHz/16 bit
DTS
96k Sound
DOLBY DIGITAL
48 kHz/16 bit
DTS
DTS
PCM
48 kHz/16 bit
No sound
DTS
d
a
f
No conversion
is made.
(Same kHz/bit as
the source)
Changing the DOLBY DIGITAL Sound
Format to the Digitally Recordable
Frequency (kHz)/Quantization (bit)
Change the sound signal conversion method to “PCM”
following the steps in “Changing the Sound Signal Conversion
Method Temporarily” on the opposite page.
Referring to c in the table below, the DOLBY DIGITAL
Surround format will be converted into the 48 kHz/16 bit
format which is recordable.
DVD
PCM
48 kHz/16 bit
No signal
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
e
g
g
No conversion is made. (Same kHz/bit as the source)
No conversion is made. (Same kHz/bit as the source)
No conversion is made. (Same kHz/bit as the source)
No conversion is made. (Same kHz/bit as the source)
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dr 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dr 90 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info