68699
76
Zoom out
Zoom in
Previous page
1/84
Next page
76
Troubleshooting—Continued
Noise or skip occurs during playback / Disc is not recognized and “NO DISC” is displayed / First track
is not played / Music scan takes longer time than usual / Playback starts from halfway / Some parts
cannot be played / Playback stops halfway / Display error occurs
The audio CD has a copy protection function (copy control function). Some audio CDs use copy protection that
doesn't conform to the official CD standard. Since these are nonstandard discs, they may not play properly in the CD/
HDD receiver.
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn’t preset all
stations, or the FM STEREO indicator doesn’t light up when tuned to a stereo FM station.
Check the antenna connections (see page 17).
Change the position of the antenna (see page 32).
Move the CD/HDD receiver away from a nearby TV or computer.
Move power cords and speaker cables as far away as possible from the tuner’s antenna.
Cars or airplanes can cause noisy interference.
The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna.
Try setting FM mode to mono (see page 36).
When listening to an AM station, noise may be heard when you operate the remote controller.
If none of the above improves the reception, install an outdoor antenna (see page 18).
If a power outage occurs or the power cable is disconnected:
If the preset stations are lost, preset them again (see page 34).
The clock and timer settings will be lost. Set the clock and timers again (see page 62).
Can’t adjust the frequency of the radio.
Use the Fast Reverse and Fast Forward [5]/[4] buttons to change the frequency of the radio (see page 32).
RDS doesn’t work.
The FM station you are tuned to doesn’t support RDS.
Install an outdoor FM antenna (see page 18).
Change the position or direction of your outdoor FM antenna (see page 18).
Move the FM antenna as far away as possible from fluorescent lights (see page 32).
Can’t record to components connected to LINE 2 or LINE3.
The CD/HDD receiver does not output signals from LINE 2 IN from LINE 2 OUT. In the same way, signals from
LINE 3 IN are not output from LINE 3 OUT. This protects the CD/HDD receiver from malfunction or failure due to
the loop between input and output.
If Audyssey EQ™ is active, you cannot perform recording to an external component. Deactivate Audyssey EQ™
(see page 26).
Interactive control with other Onkyo u-capable components is not working.
Make sure the u cables and analog audio cables are connected correctly (see page 19). Connecting only an u
cable won’t work.
Make sure the Input Display matches the type of device that you’ve connected to the CD/HDD receiver (see page 45).
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer.
If the turntable doesn’t have a phono equalizer built-in, you must provide one.
Record player cannot play.
When a record player of MC cartridge type is used, a boosting transformer or head amplifier is required.
Playback of audio CD with copy protection function (copy control function)
Tuner
External Components
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CS-925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CS-925 in the language / languages: English as an attachment in your email.

The manual is 7,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CS-925

Onkyo CS-925 User Manual - German, Dutch, Italian, Swedish - 322 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info