68699
74
Zoom out
Zoom in
Previous page
1/84
Next page
74
Troubleshooting
If you have any trouble using the CD/HDD receiver, look for a solution in this section.
Can’t turn on the CD/HDD receiver.
Make sure that the power cord is properly plugged into the wall outlet (see page 22).
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
It takes a time to start after the power is turned on from standby mode.
It may take approx. 30 seconds for the CD/HDD receiver to start because it shall obtain the IP address automatically
depending on the status of the CD/HDD receiver.
The CD/HDD receiver turns off unexpectedly.
If the sleep timer has been set and the TIMER indicator is shown on the display, the CD/HDD receiver will turn off
automatically after a specified period (see page 64).
When timed playback or recording finishes, the CD/HDD receiver automatically switches to Standby mode.
If the STANDBY indicator is flashing, the built-in amplifier protection circuit has been activated. This can happen if
there’s a short between the positive and negative wires of a speaker cable.
There’s no sound.
Make sure the speakers are connected correctly (see page 16).
Make sure the CD/HDD receiver’s volume control is not set to minimum (see page 24).
Make sure the correct input source is selected (see page 24).
Make sure the CD/HDD receiver is not muted (see page 25).
While headphones are connected, the speakers output no sound (see page 24).
The sound quality is not good.
Make sure the speaker cables are connected with the correct polarity (see page 16).
Make sure all audio connecting plugs are pushed in all the way (see page 15).
The sound quality can be affected by strong magnetic fields, such as that from a TV. Try moving any such devices
away from the CD/HDD receiver.
If you have any devices that emit high-intensity radio waves near the CD/HDD receiver, such as a cellular phone that’s
being used to make a call, the CD/HDD receiver may output noise.
The CD/HDD receiver’s precision drive mechanism may emit a faint hissing sound while reading discs during play-
back or when searching for tracks. You may be able to hear this noise in extremely quiet environments. With some
discs, the sound of disc rotation may become louder during recording.
If you can’t resolve the issue yourself, try resetting the CD/HDD receiver before contacting your Onkyo dealer.
To reset the CD/HDD receiver, while holding down the
[ON/STANDBY] button, turn the [MULTI JOG] dial.
ON/STANDBY MULTI JOG
12
1
2
HOLD TURN
Power
Audio
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CS-925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CS-925 in the language / languages: English as an attachment in your email.

The manual is 7,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CS-925

Onkyo CS-925 User Manual - German, Dutch, Italian, Swedish - 322 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info