577798
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
Troubleshooting
The unit does not turn on.
0
Confirm that the power plug is securely plugged in to
an outlet.
0
Set the POWER button to the OFF state by
pressing it once and then set it to the ON state by
pressing it again after waiting for 5 seconds or longer.
Stylus does not lower onto record.
0
Lower the lifter lever.
0
Check whether the stylus pressure has been adjusted
correctly.
0
Check whether the tone arm is balanced horizontally.
No sound is produced.
Sound is too weak.
0
Check the input and volume of the amplifier.
0
If a commercial phono-equalizer is connected, check
whether its power supply is turned on.
0
Make sure the pin cables with attached grounding are
connected correctly.
0
If connected to an amplifier with no PHONO input
terminal, sufficient volume and the correct sound
quality cannot be obtained. In this case, connect a
commercial phono-equalizer between the unit and the
amplifier before use.
A low booming sound (hum or buzz) is heard
when music is played.
0
Check whether the pin cables with attached grounding
are connected correctly (including the grounding line).
0
Keep electrical appliances such as fluorescent lamps
and power cords as far away as possible from the pin
cables with attached grounding.
0
Check whether the head shell is securely fastened by
the locking nut.
Stylus jumps.
0
Check whether the unit is subject to any vibration.
0
Check whether the stylus pressure and anti-skating
are adjusted correctly.
0
Check whether there are any scratches or warps on
the record.
0
Remove any dust attached to the stylus tip.
No sound comes out after replacing the stylus
with a special replacement stylus (DN-105ST).
0
Fit the stylus properly until a clicking sound is heard.
The indicator of the speed selector button
blinks.
0
Check whether the supplied turntable is properly
plugged into the center spindle.
0
Check whether the rotation of the turntable is blocked
by anything.
0
Press the POWER button once to turn off the power
supply and then press the POWER button again to
turn it back on.
Before starting the procedure
Problems may be solved by simply turning the power
on/off or disconnecting/connecting the power cord,
which is easier than working on the connection,
setting and operating procedure. Try the simple
measures on both the unit and the connected device.
CP-1050_eng.book 12 ページ 2014年11月17日 月曜日 午後2時29分
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CP-1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CP-1050 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CP-1050

Onkyo CP-1050 User Manual - German, Dutch - 56 pages

Onkyo CP-1050 User Manual - French - 28 pages

Onkyo CP-1050 User Manual - Italian, Swedish - 56 pages

Onkyo CP-1050 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info