577798
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
Playing records
1. Press the POWER button to turn on the power
supply.
The indicator of the speed selector button lights up.
2. Put a record on the rubber mat.
0
If it is a record with a
large hole, fit the
supplied adapter for 45
rpm records into the
center spindle.
3. Set the speed selector button according to the record’s
playing speed.
“33”: 33 1/3 rpm record
“45”: 45 rpm record
The indicator of the selected speed selector button
lights up.
4. Press the START/STOP button.
The turntable starts revolving.
5. Raise the lifter lever, hold the head shell’s finger hook,
and move the tone arm to the desired position over the
record.
6. Lower the lifter lever.
The tone arm will slowly descend until the stylus tip
touches the record and start playing the music.
0
When lowering the stylus onto a record, keep the
amplifier volume low so as not to create large
noises and adjust the volume after the stylus tip
touches the record.
To stop playing the music
1. Lower the volume of the amplifier and then raise the
lifter lever.
0
Lower the lifter lever to start playing the music
again.
2. Hold the finger hook of the head shell and lower the
lifter lever after returning the tone arm to the arm rest.
3. Press the START/STOP button.
The turntable stops revolving.
0
The player will not stop automatically even when
the record has finished playing.
0
Wait until the turntable stops revolving before
replacing records.
0
Secure the tone arm with the arm clamp if you are
not going to start playing the next tune immediately.
4. Press the POWER button to turn off the power
supply.
0
Put on the stylus cover to protect the stylus tip if you
are not going to use it for a while.
Before playing the music
0 Release the arm clamp.
0 Turn on the power supply of the connected
amplifier and switch the input so that the sound of
this unit comes out. Keep the volume of the
amplifier low.
POWER button Speed selector
button
START/STOP
button
For European models
Auto-standby function: If the unit is not operated for
about an hour with the turntable stopped, it will
automatically go into the standby mode. (The indicator
of the speed selector button will go off.) Power
consumption is reduced in the standby mode.
Press the START/STOP button or the speed selector
button in the standby mode to return to the power on
state.
Lifter lever
CP-1050_eng.book 11 ページ 2014年11月17日 月曜日 午後2時29分
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CP-1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CP-1050 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CP-1050

Onkyo CP-1050 User Manual - German, Dutch - 56 pages

Onkyo CP-1050 User Manual - French - 28 pages

Onkyo CP-1050 User Manual - Italian, Swedish - 56 pages

Onkyo CP-1050 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info