492675
52
Zoom out
Zoom in
Previous page
1/60
Next page
EN
48
12. TROUBLESHOOTING
Problem Tip
No power. Check if the AC cord is properly connected.
Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
No sound or picture. Check if the connected TV is turned on.
Check if the connections are made securely and correctly.
Check whether the connected TV or other device supports HDCP. (This unit will not
output a video signal unless the other device supports HDCP.)
Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of the other connected device.
Press and hold [B (play)] on the front panel for 5 seconds to change the setting
back to its default.
No reaction to the remote control. Connect the unit to the power outlet.
Point the remote control at the unit.
Insert the batteries with the correct polarity.
Insert new batteries in the remote control.
No audio / video signal on the display device
via HDMI cable.
If the unit is connected to an unauthorised display device with an HDMI cable, the
audio / video signal may not be output.
Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the TV
and this unit and then reconnect it to both the devices while they are powered on.
Ensure that your HDMI cable is certified.
When “HDMI Output” is set to “AV Split (Main:V, Sub:A)”, the video signal is output
from HDMI OUT MAIN jack and the audio signal is output from HDMI OUT SUB
jack.
No high-definition video signal on the TV
screen.
Does the disc contain high-definition video? High-definition video is not available when
the disc does not contain it.
Does the TV support high-definition video? High-definition video is not available when
the TV does not support it.
No 3D video on the TV screen. Check if your TV is 3D capable.
Use a 3D compatible HDMI cable to connect the 3D capable TV.
Set “3D Output” to “Auto (XX)”. (Refer to page 38.)
Wear 3D glasses and make sure they are switched on and in sync with your TV.
Check the battery levels of your glasses.
Refer to your 3D TV’s user manual for more information.
No audio signal from the loudspeakers of the
TV screen.
Assign the audio input of the TV to the corresponding video input.
Ensure that the TV's speakers are turned on in the TV menu.
No audio signal from the loudspeakers of the
audio system.
Turn on the audio system.
Set the audio system to the correct external audio input.
Increase the volume level of the audio system.
Distorted picture. Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Connect this unit directly to the TV. If the audio / video cables are connected to a
VCR, pictures may be distorted due to the VCR copyright protection system.
Completely distorted picture or black / white
picture with Blu-ray Disc™ / DVD.
Make sure the disc is Region compatible or otherwise compatible with this unit.
No sound or distorted sound. Adjust the volume.
Check if speakers are connected correctly.
Check the HDMI connections.
Check the settings in “Audio Out” menu.
Others
E5XB0_2ED_EN_Book.indb 48E5XB0_2ED_EN_Book.indb 48 2011/04/30 14:18:062011/04/30 14:18:06
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo BD-SP809 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo BD-SP809 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo BD-SP809

Onkyo BD-SP809 Quick start guide - English - 16 pages

Onkyo BD-SP809 User Manual - German - 60 pages

Onkyo BD-SP809 User Manual - Dutch - 60 pages

Onkyo BD-SP809 User Manual - French - 60 pages

Onkyo BD-SP809 User Manual - Italian - 60 pages

Onkyo BD-SP809 User Manual - Swedish - 60 pages

Onkyo BD-SP809 User Manual - Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info