581067
12
Zoom out
Zoom in
Previous page
1/16
Next page
Operations
En-12
Adjusting sound quality, etc.
DIRECT
Audio is output through shortest path which is
advantageous to sound quality without passing the sound
quality adjustment circuit (BASS, TREBLE).
1. Press the DIRECT button.
DIRECT function is enabled and the DIRECT LED
lights up.
0 BASS, TREBLE, and LOUDNESS is disabled when
the DIRECT function is enabled.
To cancel the DIRECT function: Press the DIRECT
button again to cancel, and the DIRECT LED goes off.
LOUDNESS
Bass and treble is enhanced when the volume is turned
down.
1. Press the LOUDNESS button.
LOUDNESS function is enabled and the
LOUDNESS LED lights up.
0 When the DIRECT function is enabled, LOUDNESS
function will not be enabled even when the
LOUDNESS button is pressed. Press the
LOUDNESS button after canceling the DIRECT
function by pressing the DIRECT button.
0 When the BASS or TREBLE is raised very high,
effect of the LOUDNESS will become smaller.
To cancel the LOUDNESS function: Press the
LOUDNESS button again to cancel, and the LOUDNESS
LED goes off. Also, the LOUDNESS function will be
canceled when the DIRECT function is enabled.
BASS
Adjusts the bass.
1. Turn the BASS control.
0 BASS is disabled when the DIRECT function is
enabled.
0 When the LOUDNESS function is enabled,
adjustment range in i direction for BASS will
become smaller.
TREBLE
Adjusts the treble.
1. Turn the TREBLE control.
0 TREBLE is disabled when the DIRECT function is
enabled.
0 When the LOUDNESS function is enabled,
adjustment range in i direction for TREBLE will
become smaller.
BALANCE
Adjusts the audio output balance between the left and
right speakers.
1. Turn the BALANCE control.
Using headphones
Turn down the volume, then connect your stereo
headphones with a standard plug (ø 6.3 mm, 1/4q) to the
PHONES jack. The speakers output no sound while
the headphones are connected.
Setting the Auto Standby function
This unit will go into standby mode automatically with
following conditions when the Auto Standby is set to On.
0 When there is no audio in the currently selected input
source and this unit is not operated for approximately
20 minutes
0 (North American and Continental European models)
When there is no PCM signal input in D 1 or D 2, and
this unit is not operated for approximately 20 minutes
The default Auto Standby setting is set as follows.
(North American models) Off
(Others) On
The setting can be changed with following procedure.
1. Press and hold the Í ON/STANDBY button while
the power is in standby. The power will come on when
the button is pressed, but keep on pressing the button.
The setting for the Auto Standby is changed, and it will
be displayed as follows.
(North American and Continental European models)
On: D 1 LED will blink for approximately 2 seconds.
Off: D 2 LED will blink for approximately 2 seconds.
(UK models)
On: ASB LED will light up.
Off: ASB LED will go off.
A-9010_eng.book 12 ページ 2014年12月25日 木曜日 午前10時48分
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-9010B-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-9010B-S in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-9010B-S

Onkyo A-9010B-S User Manual - German, Dutch - 64 pages

Onkyo A-9010B-S User Manual - French - 32 pages

Onkyo A-9010B-S User Manual - Italian, Swedish - 64 pages

Onkyo A-9010B-S User Manual - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info