581067
8
Zoom out
Zoom in
Previous page
1/16
Next page
Connections
En-8
Connecting a turntable
Using an audio pin cable, connect to the PHONO (MM)
terminal. Also, if there is a GND terminal on the turntable,
connect with the GND terminal of this unit using a ground
wire.
0 This unit is designed for a turntable using a MM
cartridge. When using a turntable with MC cartridge,
connect a commercial step-up transformer or head
amplifier between this unit and the turntable.
0 When the turntable has a built-in phono equalizer,
connect the audio pin cable to one of the LINE IN 1/2/
3/4 terminal.
Connecting Onkyo equipment with RI terminal
Following link functions can be operated by connecting
an Onkyo CD player, an RI dock, or a tuner (*) with RI
terminal via an RI cable.
*
The link function will not operate appropriately with other
equipment such as MD player, etc. Also, part of the function
may not operate even if it is connected via RI depending on the
equipment.
Auto Power On: When you start playback on an
equipment connected via RI while the unit is in standby
mode, the unit will automatically turn on and select that
equipment as the input source.
Direct Change: When playback is started on an
equipment connected via RI, the unit automatically
selects that equipment as the input source.
System Off: When you turn off the unit, the equipment
turn off automatically.
Remote Control: You can use the unit’s remote control
to control your other RI-capable Onkyo equipment,
pointing the remote control at the unit’s remote control
sensor instead of the equipment.
For information on remote control operation, see
“Operating with the remote control” (> 13).
Connection example (connection to a CD
player via LINE)
This is an example of connecting Onkyo CD player via
LINE. See next section for other connections.
1. Connect the audio pin cable to the LINE IN 1 jack.
0 The RI link will not work properly when connected to
a terminal other than the LINE IN 1.
2. Connect the RI cable to the REMOTE CONTROL
jack.
0 When there are two RI terminals on the used
equipment, the operation is the same when
connected to either terminal.
3. (North American and Continental European models)
Set the RI MODE (CD) switch to LINE1.
A-9010_eng.book 8 ページ 2014年12月25日 木曜日 午前10時48分
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-9010B-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-9010B-S in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-9010B-S

Onkyo A-9010B-S User Manual - German, Dutch - 64 pages

Onkyo A-9010B-S User Manual - French - 32 pages

Onkyo A-9010B-S User Manual - Italian, Swedish - 64 pages

Onkyo A-9010B-S User Manual - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info