Manual OneConcept 10035713 (page 22 of 64) (English, German, French, Italian, Spanish)

778490

Zoom out

Zoom in

1/64

The ice tray will automatically move back into position under the evaporator and

start the next cycle.

9. The ice basket full indicator will light up when the ice basket is full and the ice

cube maker will stop the ice-making cycle automatically. Gently remove the ice

from the ice basket with the ice scoop. About 5 seconds later, the ice cube maker

will restart its ice making function automatically.

10. The water reservoir empty indicator will light up when the water reservoir is

lack of water and the ice-making cycle will stop automatically. At that time, remove

the ice basket and add water to the water reservoir, and then press the ON/OFF

button again to restart the ice-making cycle.

11 . When you have got your desired amount of ice, stop the ice making cycle by

pressing the ON/OFF button and unplug the appliance from the wall outlet.

12. Open the top lid and transfer the ice to a freezer.

13. Allow the ice cube maker to reach room temperature.

14. Suggest replacing the water at least once a week. Please empty the water reservoir

if the ice cube maker is not used for a long time.

CLEANING AND MAINTENANCE

To keep your ice tasting fresh and your ice cube maker looking great, we recommend

cleaning your ice cube maker once per week.

1. Stop the ice-making cycle by pressing the ON/OFF button , unplug the ice

cube maker from the wall outlet and allow it to warm up to room temperature.

2. If residual water is found in the ice tray, gently push the ice tray back so that all

water drains into the water reservoir.

3. Move the appliance forward to a position 75mm away from the working table and

open the drain plug to drain out excess water (see below gures).

Working table75 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OneConcept 10035713 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2.91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OneConcept 10035713 Manual

Product: