• Use the ADD key when setting up a new device (e.g., a DVD player) that is not
currently on the
Device Selection Strip (if needed, refer to Using the Touch
Screen – Selecting a Device
on page 18). The remaining instructions assume
you will be adding a new device.
• Use the
REPLACE key to replace a device (e.g., a new TV set) that is currently
on the
Device Selection Strip.
6. Tap on the
ADD key to add the device to Mosaic’s memory.You will see the default
device label being added to the
Device Selection Strip.
NOTE: If you tap on the REPLACE key instead, Mosaic will ask you to select the device to be
replaced and, after your selection, if you want to relabel it. However, if the device to be
replaced has programmed keys, Mosaic will first ask if you want to keep or clear the settings.
7. Tap on the OK key to confirm your choice. Mosaic will ask if you want to relabel the
newly-added device.
• To rela b el it , tap on th e
YES key and you will see the LABEL Menu. Follow the
procedure that is similar to the one starting with step 3 on page 54 to relabel
the key and tap the
OK key when you’re done.
• To keep the label the same, tap on the
NO key.
8. You will see a confirmation screen that says the key has been successfully pro-
grammed.To program a function of the same type, tap on the
ESC key. To return to
the
Device Screen,press on ESC or MUTE for at least 2 seconds.
9. To test remote control of the newly-added device, tap on its key on the
Device
Selection Strip
. Try using the Hard Keys to adjust volume and change channels. Try
tapping on the
Page Arrows to access other remote control functions and then try
tapping on the soft keys on each page to test them.
Setup By Code 33
USER’S GUIDE
