Manual One for All URC 9800 (page 26 of 35) (English)

492784

Zoom out

Zoom in

1/35

ERROR MESSAGES

Error Meaning

MEM FULL

BATTERY LO

TOO LONG

LIST END

INVALID

NOT FOUND

ERROR

Maximum memory capacity

has been reached.

Replace batteries with four

new "AAA" Alkaline batteries.

Macro sequence being entered

exceeds 15 keystrokes.

You have reached the end of

all valid codes using the

Step-N-Set sequence.

Displayed when trying to

specify a key that is not valid

for the sequence being

entered. For example, when

selecting a Device Key (e.g.,

TV) for a Macro sequence.

Displayed when you enter in

a code that is not valid for the

device being programmed.

Displayed when an error has

occurred in the learning

sequence.

Consumer Help Line: 1-330-593-3325

World Wide Web: http://www.hudsonag.com

E-mail help: Help@hudsonag.com

TROUBLESHOOTING (cont.)

Problem: Solution

CH +/- and PREV

CH not working for

your RCA TV?

Problems changing

channels?

The red light blinks

when you press a

key but you receive

no response from

your home entertain-

ment component?

Your audio compo-

nents turn on and off

and control volume

but do not change

preset channels?

Your DSS satellite

receiver does not

respond to the

codes listed in the

manual?

The Home Producer

is not operating your

Bang & Olufsen

equipment?

Due to RCA design (1983-

1987), only the original

remote control will operate

these functions.

If your original remote control

required an ENTER keystroke

when changing channels,

press the ENTER key on the

Home Producer after you

enter the channel number.

Make sure you are aiming

your Home Producer at your

home entertainment compo-

nent and that you are within

15 feet before using your

remote control.

Some audio components may

need both a Tuner/Receiver

code and an Audio Amplifier

code to control all of the fea-

tures of your audio component.

The codes listed in this man-

ual are set up to operate your

DSS receiver on the 1st or

2nd addresses only. Make

sure the DSS Receiver can

be operated with an infrared

remote control and is not set

up to only receive Radio

Frequency.

Some Bang & Olufsen prod-

ucts, as well as some other

manufacturer’s equipment

operate at a frequency higher

than 100 kHz and will not

work with the Home Producer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 9800 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 9800 Manual

Product: