492791
19
Zoom out
Zoom in
Previous page
1/33
Next page
37
36
To Delete a Timed Sequence
1 Press and hold SETUP until the
display screen changes from
[DEVICE and the TIME] to [TIMED
SEQ]. Press SELECT. The display
will change to [ADD MACRO].
Press MENU – one time. The dis-
play will change to [DEL MACRO].
Press SELECT.
2 The display will then change to
[DEL (the DAY or D for Daily or W
for WEEKLY) and (the TIME of the
Sequence)]. If this is the timed se-
quence you would like to delete,
press SELECT. The display will
change to [DELETED] then return
to [DEVICE and the TIME].
NOTE: If you have more than one timed sequence saved in the
memory of the a/v Producer, use the MENU – key to scroll
through your saved timed sequences until you see the sequence
you would like to delete. Once the sequence is displayed on the
screen, press SELECT. The display will change to [DELETED]
then return to the next available sequence to be deleted. If there
are no other sequences to be deleted, then the display will return
to [DEVICE and the TIME].
NOTE: When setting up your sequence, you will need to include
any keystrokes that would normally be required during regular
usage, such as pressing ENTER after entering a channel number
when changing channels.
For example, enter a sequence that
will start your VCR recording your
DSS channel as follows:
SAT + POWER + SAT + 2 + 7 + 5 +
VCR + POWER + VCR + RECORD.
This sequence will turn on the DSS,
change the channel to 275, and turn
on the VCR and start it recording.
5 Once a sequence has been set up,
press the ESC key to return to the
[DEVICE and the TIME] display
screen. Below the [TIME], a CLOCK
( ) symbol will appear to show
that there is a timed sequence in
the memory.
NOTE: If, at any time during the set up of your timed sequence, a
mistake is made, press the ESC key to return to the main display
[DEVICE and the TIME]. Then delete the sequence that was
incorrect and restart your timed sequence.
After you have set up a timed sequence, you may
want to set up a second sequence that turns every-
thing off after your initial sequence. For the example
above, after recording the program from your DSS,
you can set up a second sequence to power OFF
your DSS and VCR. Just repeat steps 1 through 5 to
set up a sequence to power OFF your components.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC-8800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-8800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of One for All URC-8800

One for All URC-8800 User Manual - German - 2 pages

One for All URC-8800 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info