585195

One for All URC 8210 - Kameleon 10 Manual

24
Zoom out
Zoom in
Previous page
1/247
Next page
WWW.ONEFORALL.COM 23
Macros (sequence of commands)
Macros (direct)
You can program your KAMELEON 10 to issue a sequence of commands at the
press of one button. For example, you may want to turn off your TV, VCR and
Satellite at the same time. Any sequence of commands you regularly use can be
reduced to one key stroke for your convenience. A key that is programmed with
a Macro works through all modes (provided it’s accessible in that mode).
Therefore a Macro can best be set on either the A, B or C key. However, you can
install a Macro on any key (provided it’s accessible in that mode), except for the
device keys (TV1, TV2, VCR, AUX1, SAT, AUD1, AUD2, CD, AUX2 and DVD), the
MAGIC key and the SCROLL key.
Example: To set up a Macro
that switches off your television, video recorder and
satellite receiver
on the “A” key on your KAMELEON 10:
1. Press and hold MAGIC until the rabbit comes out of the hat (the screen
will change to the setup screen).
2. Press MACRO.
3. Press the device key (e.g. TV1) to display all keys of the mode.
4. Then press the key to which the Macro will be assigned, in this case the
“A” key.
5. Next press TV1, POWER, VCR, POWER, SAT, POWER.
6. To store the Macro, press and hold MAGIC until you get two blinks on
the IR Indicator and the rabbit disappears (the screen will return to the
setup screen).
Result: Whenever you press the “
A” key, the KAMELEON 10 will turn off your
TV, VCR and Satellite receiver.
- Each MACRO can consist of a maximum of 15 keystrokes.
- To include a function from a particular screen in a mode, use the SCROLL
key.
- Make sure that you program a Macro on a spare key that you don’t use in
any mode.
- Once you program a Macro on a specific key, the sequence will work
regardless of the mode (TV1, TV2, VCR, AUX1, SAT, AUD1, AUD2, CD, AUX2
or DVD) you are using (if the label is the same as the label on which the
Macro was programmed). This means that the function picked on that
specific key will be sacrificed.
- To avoid accidental recordings with the KAMELEON 10, you must press the
RECORD key twice to begin recording. Please note that if you assign a
Macro or Shifted Macro to the RECORD key, this will deactivate the double
key press. Therefore we recommend not to assign a Macro to this key.
- If you had to hold down a key for a few seconds on the original remote
control to get a function, this function may not work in a macro on your
KAMELEON 10 remote.
- Keys such as (TV) menu, (VCR) menu etc. will not change screen when
pressed during Macro programming.
- Upon changing the batteries your Macro(s) will be retained.
- If you program a Macro on a key, the original function will become shifted
(excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to
access it. If you place a Macro on a digit key, access the original function by
pressing MAGIC twice and then the digit key.
- You can replace a Macro by placing another Macro on top.
Extra Features
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 8210 - Kameleon 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 8210 - Kameleon 10 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info