585195

One for All URC 8210 - Kameleon 10 Manual

22
Zoom out
Zoom in
Previous page
1/247
Next page
WWW.ONEFORALL.COM 21
Device Sleeptimer
If your device has a “Sleeptimer” function built in, you can access this function
with your
KAMELEON 10 remote. To do so:
1. Make sure your device is switched on.
2. Press the device key TV1 (or TV2, SAT, CD, AUD1, AUD2).
3. Point the KAMELEON 10 at your device and press and release the MAGIC
key then press POWER. You should see the Sleeptimer activate on your
device. To increase the timer, simply press POWER again (within 10 seconds)
until the timer gets to the desired time.
- To deactivate the “Sleeptimer”, repeat steps 1 – 3 above. During step 3,
continue pressing POWER again (within 10 seconds) until the timer indicates
zero minutes.
- Depending on how you used sleeptimer on the original remote, you might
need to access sleeptimer in a different way (through menu for example).
KAMELEON 10 - Timer
The KAMELEON 10 – Timer function allows you to activate a <desired func-
tion>
from a specific <device mode> within a <specific amount of minutes>
(max. amount of timer is 60 minutes).
- The <desired function> can be an existing function within a specific mode,
a Macro, a Key Magic function or a Learned function.
Example: you want your TV to switch off after 45 minutes.
1. Press and hold the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press OTHER.
3.
Press 9 8 5 to enter the KAMELEON 10 –Timer programming mode.
The animated IR Indicator will blink twice.
4. Press TV1 to select the mode where the KAMELEON 10 – Timer function will
come from. The animated IR Indicator will blink twice.
5. Press the POWER key to select the desired function. The animated IR
Indicator will blink twice.
6. Now press 4 5 to enter the amount of minutes after which the <Desired
function> needs to be activated (e.g. for 5 min. press 05, max. up to 60).
7. Press and hold OK for a duration of 3 seconds to activate the KAMELEON 10
– Timer function.
- Invalid key presses during the programming of KAMELEON 10 - Timer will
be ignored.
- The <Desired function> can be any key except for Device keys, SCROLL and
MAGIC.
- While the KAMELEON 10 – Timer is running, the IR animation will light
every 15 seconds.
- The KAMELEON 10 –Timer function is cancelled by setting up a new
KAMELEON 10 – Timer function.
- If no key is pressed while setting up a KAMELEON 10 – Timer function,
the remote will return to user mode after 30 seconds.
- The SCROLL key can be accessed any time during programming if applicable
in the current device mode.
Extra Features
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 8210 - Kameleon 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 8210 - Kameleon 10 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info