492799
13
Zoom out
Zoom in
Previous page
1/36
Next page
2. Enter 9 - 9 - 5.The LED will blink twice.
Then press
POWER once.
3. For the first device you want in the power
on sequence,press its device key (e.g.,
CBL/SAT) once.
4. Repeat step 3 up to five more times to add
desired devices to the power-on sequence.
5. To save the settings and exit the program,
press and hold
SET until the LED blinks
twice,then release
SET.
Operating Master Power
1. After programming,point the remote
control at the devices and press
POWER
for at least 2 seconds to sequentially turn
on or off your devices.
NOTE:When POWER is pressed for less than
2 seconds,a power command will only be sent
to the currently-selected device.This allows you
to still individually power devices on or off.
2. You will see the devices turn on or off
according to your programmed sequence.
NOTE:The currently-selected device will always
turn on first,followed by the remaining
programmed sequence.After the master power
sequence has been completed,the remote control
will be set to control the first powered-on device.
NOTE: If one or more devices does not have a
POWER key, the power off/on sequence may be
slightly delayed when the remote control signals
the device(s).This action is normal.
Clearing Master Power
1. Press and hold SET until the LED (red light)
blinks twice,then release
SET.
2. Enter 9 - 9 - 5.The LED will blink twice.
Then press
POWER once.
3. Press and hold
SET until the LED blinks
twice,then release
SET.Master Power is
now cleared.
13
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All 6-DEVICE PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All 6-DEVICE PVR in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info