492799
12
Zoom out
Zoom in
Previous page
1/36
Next page
CHECKING THE CODES
If you have set up the remote control using the
Searching For Your Code procedure (on the previous
page),you may need to find out which four-digit code
is operating your equipment.
For example,to find out which code is operating your TV:
1. On the remote control,press
TV once.
2. Press and hold SET until the LED (red light)
blinks twice,then release
SET.
3. Enter 9 - 9 - 0.The LED will blink twice.
4. To view the code for the first digit,press
1
once.Wait 3 seconds,count the LED
blinks (e.g.,three blinks = 3) and write
down the number in the leftmost box in
the TV code boxes on page 10
NOTE:If a code digit is “0”,the LED will not
blink.
5. Repeat step 4 three more times for
remaining digits.Use
2 for the second
digit,
3 for the third digit,and 4 for the
fourth digit. Write down the code digits in
the remaining TV code boxes on page 10.
6. To check for codes of other devices,repeat
steps 1 through 5,but substitute the
appropriate device key for each device you
are checking.Write down the devices code
digits in the appropriate code boxes on
page 10.
PROGRAMMING MASTER POWER
In its default state,the POWER key on the URC-6131
remote control will individually power your home
entertainment devices on or off.However,you can also
program a Master Power function onto the
POWER key
that will sequentially turn on or off all the devices with
a single key press.
Programming The Power Key For Master Power
1. Press and hold SET until the LED (red light)
blinks twice,then release
SET.
12
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All 6-DEVICE PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All 6-DEVICE PVR in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info