538620
92
Zoom out
Zoom in
Previous page
1/120
Next page
92
EN
Usage Tips
12
12
If the camera does not work as intended, or if an error message is displayed on the screen,
and you are unsure of what to do, refer to the information below to fix the problem(s).
Troubleshooting
Usage Tips
Battery
The camera does not work even when
batteries are installed.
Insert recharged batteries in the correct
direction. g “Inserting and removing
the battery and card” (P. 7)
Battery performance may have been
reduced temporarily due to low
temperature. Take the batteries out of
the camera, and warm them by putting
them in your pocket for a while.
Card
An error message is displayed.
g “Error message” (P. 93)
Shutter button
No picture is taken when the shutter
button is pressed.
Cancel sleep mode.
To save battery power, the camera
automatically goes into sleep mode and
the monitor turns off if no operations are
performed for a pre-determined period of
times while the camera is on. No picture
is taken even if the shutter button is
fully pressed in this mode. Operate the
zoom lever or other buttons to restore
the camera from sleep mode before
taking a picture. If the camera is left for
another 5 minutes, it automatically turns
off. Press the n button to turn the
camera on.
• Press the q button to switch to the
shooting mode.
• Wait until #(flash charge) stops blinking
before taking pictures.
With prolonged camera use, the internal
temperature may increase, resulting in
automatic shutdown. If this occurs, wait
until the camera has sufficiently cooled.
The camera’s external temperature
may also increase during use, however
this is normal and does not indicate
malfunction.
Monitor
Difficult to see.
Condensation may have occurred. Turn
off the power, and wait for the camera
body to become acclimated to the
surrounding temperature and dry out
before taking pictures.
The light is caught in the picture.
Shooting with flash in dark situations
results in an image with many flash
reflections on dust in the air.
Date and time function
Date and time settings return to the
default setting.
If the batteries are removed and left
out of the camera for about 3 days
*1
,
the date and time settings return to the
default setting, and must be reset.
*1 The time until the date and time
settings return to the default setting
varies depending on how long the
batteries have been loaded.
g “Turning on the camera and
making the initial settings” (P. 8)
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus Stylus 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus Stylus 1 in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus Stylus 1

Olympus Stylus 1 User Manual - German - 131 pages

Olympus Stylus 1 User Manual - Dutch - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info