538620
91
Zoom out
Zoom in
Previous page
1/120
Next page
91
EN
Using separately sold accessories
11
3
Adjust the settings for each group in the super control panel.
250250 F5.6
0.0
0.0
P
3838
A Mode
TTL
M
Off
+5.0
TTL +3.0
1/8
1
Ch
Flash intensity value
Group
• Select the flash control
mode and adjust the flash
intensity separately for
each group. For MANUAL,
select the flash intensity.
# Sync
Channel
• Set the communication
channel to the same
channel used on the flash.
Flash intensityFlash control
mode
Adjust settings for the camera
flash unit.
4
Press the flash switch to pop up the internal flash.
After confirming that the built-in and remote flash units have charged, take a test
shot.
Wireless flash control range
Position the wireless flash units with their
remote sensors facing the camera. The
following illustration shows the approximate
ranges at which the flash units can be
positioned. The actual control range varies with
local conditions.
5m
3m
100°100°
50°
50°
50°
50°
60°
60°
30°30°
30°
30°
# Cautions
We recommend using a single group of up to three remote flash units.
Remote flash units can not be used for second curtain slow synchronization longer than
4 seconds.
If the subject is too close to the camera, the control flashes emitted by the built-in flash
may affect exposure (this effect can be reduced by reducing the output of the built-in flash
by, for example, using a diffuser).
Other external flash units
Observe the following precautions when mounting an external flash unit not designated
for use with this camera on the camera hot shoe:
Using obsolete flash units that apply currents of more than about 24 V to the camera hot
shoe X-contact will damage the camera.
Connecting flash units with signal contacts that do not conform to Olympus specifications
may damage the camera.
Use only with the camera in shooting mode M at ISO settings other than [AUTO].
Flash control can only be performed by manually setting the flash to the ISO sensitivity
and aperture values selected with the camera. Flash brightness can be adjusted by
adjusting either ISO sensitivity or aperture.
Use a flash with an angle of illumination suited to the lens. Angle of illumination is usually
expressed using 35-mm format equivalent focal lengths.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus Stylus 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus Stylus 1 in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus Stylus 1

Olympus Stylus 1 User Manual - German - 131 pages

Olympus Stylus 1 User Manual - Dutch - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info