470768
11
Zoom out
Zoom in
Previous page
1/36
Next page
54 55
ISO speed
AUTO light control range (m)
F8 F5.6 F4 F2.8 F2 F1.4
F11 F8 F5.6 F4 F2.8 F2 F1.4
F16 F11 F8 F5.6 F4 F2.8 F2 F1.4
F22 F16 F11 F8 F5.6 F4 F2.8 F2
F32 F22 F16 F11 F8 F5.6 F4 F2.8
F32 F22 F16 F11 F8 F5.6 F4
F32 F22 F16 F11 F8 F5.6
F32 F22 F16 F11 F8
F32 F22 F16 F11
1.1 - 12.8 1.2 - 14.2 1.7 - 20.0 1.9 - 21.4 2.2 - 25.7 2.5 - 28.5 2.8 - 32.1 3.1 - 35.7
0.8 - 9.0 0.9 - 10.0 1.2 - 14.0 1.3 - 15.0 1.6 - 18.0 1.7 - 20.0 2.0 - 22.5 2.2 - 25.0
0.5 - 6.4 0.6 - 7.1 0.8 - 10.0 0.9 - 10.7 1.1 - 12.8 1.2 - 14.2 1.4 - 16.0 1.5 - 17.8
0.5 - 4.5 0.5 - 5.0 0.6 - 7.0 0.6 - 7.5 0.8 - 9.0 0.8 - 10.0 1.0 - 11.2 1.1 - 12.5
0.5 - 3.2 0.5 - 3.5 0.5 - 5.0 0.5 - 5.3 0.5 - 6.4 0.6 - 7.1 0.7 - 8.0 0.7 - 8.9
0.5 - 2.2 0.5 - 2.5 0.5 - 3.5 0.5 - 3.7 0.5 - 4.5 0.5 - 5.0 0.5 - 5.6 0.5 - 6.2
0.5 - 1.6 0.5 - 1.8 0.5 - 2.5 0.5 - 2.7 0.5 - 3.2 0.5 - 3.6 0.5 - 4.0 0.5 - 4.5
0.5 - 1.1 0.5 - 1.2 0.5 - 1.7 0.5 - 1.8 0.5 - 2.2 0.5 - 2.5 0.5 - 2.8 0.5 - 3.1
0.5 - 0.7 0.5 - 0.8 0.5 - 1.2 0.5 - 1.3 0.5 - 1.5 0.5 - 1.7 0.5 - 1.9 0.5 - 2.2
3200 1600
800 400 200 100 50 25
8 (W panel)
10 (W panel)
12 14 17 25 35 42
16 (W panel) 20 (W panel)
24 28 35 50 70 85
Firing angle (mm) Upper row: FOUR THIRDS. Lower row: 135
Lens iris
<MANUAL>
In this mode, the flash is emitted according to the guide number (GN) setting.
<AUTO>
In this mode, the flash light intensity is controlled automatically according to the lens iris (F) setting.
ISO speed
Lens iris (F)
1. Turn dial A to adjust the ISO speed.
2. Adjust Zoom according to the focal length of the lens.
3. Turn dial B according to the lens iris (F).
If the camera setup (ISO speed and lens iris (F)) does not
match one of the usable ISO speed/lens iris (F) combina-
tions, the ISO and F indicators blink to alert you. In this
case, change the camera setup (ISO speed and/or lens
iris (F)).
Memo: Test flash activation
Flash activation can be tested before actually releasing
the shutter.
Press the Test button for test flash activation.
The light control is OK when the AUTO CHECK lamp blinks
for about 5 seconds after the test flash activation.
If the lamp does not blink, change the lens iris (F), ISO
speed, subject distance, etc.
The light check by means of test flash activation is pos-
sible only in the AUTO mode.
Guide number (GN)
Light intensity ratio
1. The control panel shows the current guide number (GN)
together with the light intensity ratio.
Light intensity ratio: Ratio of emitted light intensity with
respect to the intensity at full emission.
2. Adjust Zoom according to the focal length of the lens.
3. Turn dial A to set the guide number (GN).
(This is also possible by turning dial B.)
How to determine the lens iris (F) and guide number (GN)
1. When the shooting distance and lens iris are already
determined:
Determine the guide number (GN) with the following
formula and set the GN on the FL-50.
Guide number (GN) =
Light control range in AUTO mode
The above table shows the light control ranges in the off-flash condition.
The displayed nearer value is 0.6 or more when the light emission section faces the front and 0.5
or more when it faces downward.
4.When flash activation has been performed correctly,
the AUTO CHECK lamp blinks for about 5 seconds
after the shutter is released.
Lens iris (F) x Shooting distance (m)
ISO speed coefficient
2. When it is necessary to determine the lens iris (F):
Determine the lens iris (F) with the following formula and
set F on the FL-50.
Lens iris (F) =
Guide number (GN) x ISO speed coefficient
Shooting distance (m)
3. When it is necessary to determine the optimum shooting
distance:
=
Guide number (GN) x ISO speed coefficient
ISO speeds and their coefficients
ISO speed
25 50 100 200 400 800 1600 3200
Coefficient
0.5 0.71 1.0 1.4 2.0 2.8 4.0 5.6
See page 64 for the guide number list.
Memo:
By selecting an ISO speed and lens iris (F) different from those
set on the camera, the light intensity can be adjusted in 1/3 steps.
Optimum shooting
distance (m)
Lens iris (F)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FL-50R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FL-50R in the language / languages: English as an attachment in your email.

The manual is 9.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus FL-50R

Olympus FL-50R User Manual - German - 60 pages

Olympus FL-50R User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info