470768
10
Zoom out
Zoom in
Previous page
1/36
Next page
52 53
Flash light intensity is controlled
according to the light detected
through the auto light receptor of
the flash and to the lens iris (F).
AUTO
MANUAL
54
55
PICTURE SHOOTING USING A DIGITAL CAMERA WITHOUT COMMUNICATION CAPABILITY
<Selecting the control mode>
1. Tu rn the electronic flash on. The batteries are recharged
when the Charge lamp lights up.
2. Press the MODE button to select the flash control mode.
The selected mode is shown in the control panel.
The mode is switched every time the MODE button is
pressed.
Usually use this mode.
Flash activation is performed
according to the manually set
guide number (GN).
Flash control
mode
Control panel
display Control operation Main application Ref.
Pages
Shooting using manual flash.
<FP MANUAL>
In this mode, Super FP emission is performed at the set light intensity.
Displayed according to the
focal distance of the lens.
Guide number (GN)
Optimum shooting distance
1. The control panel shows the current guide number (GN)
together with the optimum shooting distance according to
the camera setup.
2. Turn dial A to set the guide number (GN).
Set the guide number (GN) so that the optimum shooting
distance is equal to the subject distance.
When the optimum shooting distance is 0.6 m (0.5 m in
case of close-up flash) or less, the displayed figure blinks
to warn that the subject is located outside the flash light
emission area.
The optimum shooting distance varies according to the
camera setup (ISO speed, lens iris (F), lens focal length
(ZOOM) and shutter speed). See page 65 for details.
Memo: The optimum shooting distance can be calculated with
the following formula.
Optimum shooting distance = Guide number (GN)/Lens iris (F)
Light intensity adjustment
The flash light intensity can be adjusted between +0.7 and –0.7.
Light intensity adjustment value
The light intensity adjustment must be set to ON in the
custom setup operation (page 61).
The indicator appears in the control panel.
1. Turn dial B to select a light intensity adjustment value in
the following steps.
0 +0.3 +0.7
0 –0.3 –0.7
2. The display shows the light intensity adjustment value ex-
cept when the value is 0, in which case the display does not
show the guide number (GN) or optimum shooting distance.
3. Even if the camera’s flash adjustment mode is selected,
only the FL-50’s adjustment setting will work. The camera’s
setting will not work.
[Example]
Selected
adjustment value
Adjustment value
displayed on FL-50
Actual light intensity
adjustment
FL-50 +0.3 +0.3 +0.3
Camera +0.3
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FL-50R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FL-50R in the language / languages: English as an attachment in your email.

The manual is 9.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus FL-50R

Olympus FL-50R User Manual - German - 60 pages

Olympus FL-50R User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info