18427
8
Zoom out
Zoom in
Previous page
1/18
Next page
1514
Follow the procedure below to set the user ID number:
MENU
ERASE SP DICT
ERASE SP DICT
INDEX/
FOLDER
MENU
ERASE SP DICT
INDEX/
FOLDER
MENU
ᕅ ᕆ
In the Stop mode, press and hold the MENU switch
µ
for at least 2 seconds. The menu will be dis-
played on the LCD panel
.
twice the MENU switch's up/down control in the down direction to display [ID AAA] (when in the ini-
tial setting). The cursor will start blinking at the first digit's position.
Turn the MENU switch's up/down control in the up direction to change the character displayed: [A]
Ǟ [B] Ǟ [C]
……
[X] Ǟ [Y] Ǟ [Z] Ǟ [0] Ǟ [1] Ǟ [2] Ǟ
……
[7] Ǟ [8] Ǟ [9] Ǟ [A] Ǟ [B]
……
When the desired character is displayed, press the MENU switch to set it. The blinking cursor
moves to the next position.
Follow the same procedure to set each character. When ID setting is complete, press the MENU
switch to enter the Format mode. (See page 31.)
Pressing the STOP button instead of the MENU switch after ID setting ends menu setting and
restores the Stop mode.
t
If the Format mode is entered in
but you do not need to format the built-in memory, press the
STOP button. This ends menu setting and restores the Stop mode.
Make sure [NEW], memory remaining time, and the message number are displayed on the LCD
panel. Ensure there is sufficient remaining time available for your message and select the folder
([A] or [B]), microphone sensitivity ([DICT] or [CONF]) and recording mode ([SP] and [LP]).
To change the folder, press the INDEX/FOLDER button
to move to the position after the last
recording in the other folder. To change the microphone sensitivity or recording mode, use the
menu (see page 29 for the change procedure).
Press the REC button
to start recording. The LED
lights and recording starts.
Press the STOP button to stop recording and enter the Stop mode.
You can monitor what is being recorded through an earphone plugged into the EAR jack
(recording monitor).
t
If [NEW] is not displayed when you press the REC button, insertion recording will start. This over-
writes the previous recording so be sure you always check the display before pressing the REC
button.
t
If [FULL] is displayed on the LCD panel, additional recording is not possible. In this case, erase
unnecessary messages to free up more memory. If there are any messages that you want to pre-
serve, transfer the voice data to a PC using the PC transfer kit (available as a standard or optional
accessory).
t
Do not connect or disconnect the AC adapter plug during recording. Always enter the Stop mode
before plugging or unplugging the adapter. Otherwise, you will not be able to play back the mes-
sage being recorded.
t
The recording monitor volume cannot be adjusted.
t
Always use the SP mode if you want to record high-quality voice data suitable for transfer to a PC
for use in voice recognition operations.
(For more about voice recognition, see page 33.)
BASIC OPERATION
RECORDING
REC STOP
INDEX/
FOLDER
Remaining
memory time
Message No.
T572 Inst DS-150-E.Q33J 1999/4/26 0:57 PM y[W 14
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus DS150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus DS150 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info