18427
7
Zoom out
Zoom in
Previous page
1/18
Next page
1312
REPLACING THE BATTERIES
When starts blinking on the LCD panel, replace the batteries as soon as possible.
If [BATT] and light on the LCD panel, operation will stop. Replace the batteries immediately.
If the recorder does not function normally after the batteries have been replaced, see “RESET” on
page 32.
USING THE AC ADAPTER
Plug the optional AC adapter into a house-
hold power outlet and connect the power plug
to the recorder’s power connector (DC 3 V)
ƾ
as shown in the illustration. Do not con-
nect the AC adapter to the recorder during
recording. Always stop recording before con-
nection. Otherwise it may not be possible to
play back the voice data being recorded.
Warning
Misuse of the AC adapter can result in damage, fire or electric shock. Always use the dedicated
AC adapter. Never use an adapter with different polarity or output voltage.
Stop the recorder before disconnecting the AC adapter.
When not using the recorder, always disconnect the AC adapter from the power outlet.
ERASE SP DICT
REC STOP
INDEX/
FOLDER
SETTING THE CLOCK AND ID NUMBER
Once the clock and the user’s ID number have been set, the user ID of the person creating the mes-
sage and the time of the day are automatically recorded in the message header. To ease manage-
ment of recorded messages, it is recommended that the clock and a 4-digit ID number be set before-
hand.
Follow the procedure below to set the clock:
ERASE SP DICT
MENU
ERASE SP DICT
INDEX/
MENU
ERASE SP DICT
MENU
ERASE SP DICT
INDEX/
MENU
ERASE SP DICT
INDEX/
MENU
REC STOP
INDEX/
FOLDER
ᕅ ᕆ
In the Stop mode, press and hold the MENU switch
µ
for at least 2 seconds. The menu will be dis-
played on the LCD panel
.
Turn the MENU switch's up/down control
µ
in the up direction within 4 seconds to display the
[Date] and [Time].
Press the MENU switch again. The cursor will blink in the year position.
Press the MENU switch's up/down control to change [Year].
When the correct year is displayed, press the MENU switch. The blinking cursor moves to the
[Month] position.
Follow the same procedure to set [Day], [Hour] and [Minute]. When the clock setting is completed,
press the MENU switch to enter the ID number setting mode. (To set only the ID number, see page
14.)
If ID number setting is not required, press the STOP button
ƹ
instead of the MENU switch after
clock setting. This completes menu setting and restores the Stop mode. (When the STOP button is
pressed, the clock starts counting seconds.)
t
All settings are automatically canceled after three minutes if no further operation takes place.
T572 Inst DS-150-E.Q33J 1999/4/26 0:57 PM y[W 12
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus DS150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus DS150 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info