660647
28
Zoom out
Zoom in
Previous page
1/33
Next page
OL5815 User Manual 28
How to Record Your Announcement
If you have assigned different mailboxes to different people, be sure to tell callers in your announcement to press *1 (‘Star
1’), *2 (‘Star 2’) or *3 (‘Star 3’). Otherwise, messages will be stored in Mailbox 1. For example:
“Hello. To leave a message for Bruce, press * 1; for Deborah, press * 2; and for Don, press * 3.
Otherwise, leave your message after the beep. Thank you.”
Leave a few seconds blank at the end of your recorded announcement to allow the caller to select a mailbox.
Recording Announcement A1 (Announce Only set to OFF)
1. Press MENU until you hear ‘Announcement One’.
2. Press REC/MEMO. You will hear ‘Now Recording’, followed by a beep. Speak toward the Base Unit. You have up
to 60 seconds for your announcement. Your announcement must be at least 3 seconds in length.
3. Press when finished. Your recording will be played automatically. If you’re not satisfied, record your announcement
again.
Recording Announcement A2 (Announce Only set to ON)
Follow the same steps as recording Announcement A1. However, this time you will hear ‘Announcement Two’, since you
have set Announce Only to ON.
Set your Remote Access Code
Your Remote Access code allows you to retrieve messages, and record memos and announcements when you’re away from
your Answering System. You do this by calling the line to which your Answering System is connected, using any
touch-tone phone. When you hear your outgoing announcement, enter your 4-digit Remote Access code. Your access code
can be any 4-digit number, from 0000 to 9999.
Follow the programming steps in the Setup section above. You’ll be programming one digit at a time. Don’t forget to press
MENU after selecting each digit.
Once you’ve accessed your Answering System remotely, from a touch tone phone, your can perform the following
functions:
IF YOU WANT TO PRESS
Play messages in a mailbox 1, 2, or 3
Repeat / Play Previous Message 4 / Press 4 Twice
Stop playback or recording 5
Play Next Message 6
Delete current message 7
Record a Memo 8, then choose Mailbox 1, 2, or 3
Record Announcement 9, then 5 to Stop
Turn System On /Off 0
Play Help Menu *
Set ‘Announce Only’ On / Off (preset to OFF)
If you want callers to leave messages, Announce Only must be set to OFF.
If you do not want callers to leave messages, set Announce Only to ON.
Follow the steps in the beginning of the Setup section.
Turn Audible Message Alert On / Off
With Message Alert programmed ON, the Base unit will beep approximately every 10 seconds, alerting you to new,
unplayed messages and memos. Follow the steps in the beginning of the Setup section to program this feature.
Turn Base Ringer On / Off (preset to ON)
Your Base Ringer is independent of the Handset ringer. To program this feature, follow the steps in the beginning of the
Setup section.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia OL5815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia OL5815 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info