660647
27
Zoom out
Zoom in
Previous page
1/33
Next page
OL5815 User Manual 27
Part II Digital Answering System Operation
1 Setup
1. In the idle (standby) mode, press MENU to program each of the following options:
Turn Answering System On / Off
Set the Day and Time
Record your outgoing Announcement
Set your Remote Access code
Set ‘Announce Only’ On / Off
Turn audible Message Alert On / Off
Set Base ringer On / Off
Set number of Rings to answer
Press MENU repeatedly, until you reach the desired option.
2. Once the desired option is reached and the current setting is announced, press | or | to change the setting.
3. Press MENU to confirm your setting.
At any time, press to exit setup mode.
Turn Answering System ON / OFF (preset to ON)
When you first power up the Base Unit, the Answering System is automatically in the ON mode. Follow the steps above to
manually turn the system Off and On.
Clock Setting
Follow the steps above to program the current Day of the week, then the Hour, and then the Minute:
First, program the Day As you program, the display shows ‘d’ and a number, 1 to 7, representing the day of the week 1
represents Sunday; 2 represents Monday, and so on. Press MENU when done.
Next, program the Hour. Be careful that you program a ‘pm’ hour if the current time is in the afternoon or evening, or an
‘am’ hour if the current time is after midnight or in the morning. Press MENU when done.
Next, program the Minute. You’ll be programming the ‘tens’ column first. Your choices are 0 through 5, as the minutes
range from 00 to 59. Press MENU. Now, you are programming the ‘ones’ column, where your choices are 0 through 9.
Press MENU to confirm.
Record Your Outgoing Announcement
You can record 2 different outgoing announcements; one inviting your caller to leave a message (Announce Only OFF);
one asking your caller to call back later (Announce Only ON).
Outgoing Announcement A1 is played when Announce Only mode is OFF. Callers can leave a message in this mode. Your
Answering System is preset with Announce Only set to OFF.
Outgoing Announcement A2 is played when Announce Only mode is ON. Callers cannot leave a message in this mode.
If you do not record your own announcements, your answering system will play a pre-programmed message to your
callers:
A1: “Please leave your message after the beep.”
A2: “I am sorry I am not available. Please call back later.”
See Set ‘Announcement Only’, later on in this section.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia OL5815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia OL5815 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info