Manual Olympia A 280 (page 13 of 39) (English, German, Dutch, French, Italian, Spanish)

569316

Zoom out

Zoom in

1/39

4 Remove the protective foil from the pouch.

5 Insert the document to be laminated in the pouch so that there is a

margin of approx. 3 - 5 mm to the edge of the foil on all sides.

6 Insert the foil containing the document in the laminator's insertion slot.

Insert the ready closed side of the foil first.

Note: To prevent the laminating foil from creasing, never insert the

open end of the pouch in the insertion slot of the laminator first. When insert-

ing the foil, observe the instructions on the insertion slot. The laminating

process occurs automatically.

Clearing Foil Jams

The laminator is provided with a "Jam Release" function in order to clear foil

jams quickly.

1 If the foil jams, switch the equipment off and press the switch on the

top, right side of the unit.

2 Hold the laminator firmly and pull the foil together with the document to

be laminated out of the laminator's insertion slot.

3 It will probably be necessary to then clean the unit several times as

described in the Section "Cleaning and Servicing".

4 If foil jams occur repeatedly or jammed foil cannot be removed from

the laminator, please contact our hotline.

Cleaning and Servicing

Deposits and residual adhesive on the transport rollers can influence the re-

sults of the laminating process. Therefore, the transport rollers must be

cleaned periodically after use:

To do this, insert a folded piece of paper in the insertion slot. Residual adhe-

sive is removed and taken up by the paper when ejected. Repeat the proc-

ess several times.

Disconnect the power plug before starting to clean the unit with a damp cloth.

If necessary, the housing can be cleaned using a cloth moistened with clean

water with a little mild soap applied. Never use any solvents or aggressive

cleaning agents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 280 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia A 280 Manual

Product: