Manual Olympia A 280 (page 12 of 39) (English, German, Dutch, French, Italian, Spanish)

569316

Zoom out

Zoom in

1/39

Weight: Approx. 1250 g

Hot Laminating

1 Connect the power cable to an easily accessible, standard electrical

socket.

Caution: Check that the voltage specifications of the unit correspond

to that of your power supply network (220 - 240 V, 50 Hz).

2 Switch on the On/Off switch on the top, right-hand side of the unit

3 The drive motor for the transport rollers starts up. The warm-up phase

begins. The correct operating temperature is reached after about 5

minutes and the red indicator lamp lights up.

4 Insert the document to be laminated in the pouches so that there is a

margin of approx. 3 - 5 mm to the edge of the foil on all sides.

Caution: Only use foil intended for hot laminating.

5 Insert the foil containing the document in the laminator's insertion slot.

Insert the ready closed side of the pouch first.

Note: To prevent the laminating foil from creasing, never insert the

open end of the foil pocket in the insertion slot of the laminator first. When

inserting the foil, observe the instructions on the insertion slot. The laminating

process occurs automatically.

Caution: The foil is very hot and soft when ejected following lamina-

tion. Therefore, handle the laminated product with extreme care.

Note: To flatten the laminated product, place a book or similar heavy,

flat object, on it.

Cold Laminating

1 Connect the power cable to an easily accessible, standard electrical

socket.

Caution: Check that the voltage specifications of the unit correspond

to that of your power supply network (220 - 240 V, 50 Hz).

2 Switch on the On/Off switch on the top, right-hand side of the unit

3 The drive motor for the transport rollers starts up, the green indicator

lamp lights up.

Caution: If the laminator was switched to hot laminating shortly before,

allow it to cool down. The equipment takes about 30 minutes to cool down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 280 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia A 280 Manual

Product: