644753
18
Zoom out
Zoom in
Previous page
1/84
Next page
Cold Lamination
Laminator A 235 Plus
18
CAUTION!
Danger of burns due to hot laminating foil!
When ejected after hot laminating, the laminating foil is very hot.
Take particular care when handling hot laminating foils.
The laminator automatically draws in the laminating foil and discharges it on the
output side.
Cold Lamination
For cold lamination, the laminating foil is coated with a special adhesive. Unlike
hot lamination, cold lamination bonds the foil by means of pressure, not heat.
Cold lamination is suitable for non-permanent sealing. The cold lamination foil can
usually be removed from the laminated material without leaving any residues.
1. Stand the laminator securely on a level, horizontal surface.
Make sure the on/off switch is switched to OFF before plugging the lamina
tor into a power socket.
2. Plug the laminator cable into an available power socket.
3. Switch the ON/OFF switch to ON and the COLD/HOT lamination switch to
COLD. The POWER and READY indicator lamps light up.
4. The drive motor for the rollers starts up. The laminator is ready for operation.
If you have used the laminator for hot lamination shortly before you want to
cold-laminate, let it cool down for around 30 minutes.
5. Remove the protective foil from the lamination foil.
6. Place the material to be laminated inside the laminating foil. For an optimal
lamination result, leave a space of 3 to 5 mm between the edges of the docu
ment and edges of the foil on all sides.
If the material to be laminated is not in a standard format, also place an
insert inside the laminating foil that corresponds with the format of the lami
nating foil. Place the material to be laminated at the front edge of the
closed end of the laminating foil.
7. Feed the prepared laminating foil with the closed side first, keeping it straight,
into the infeed of the laminator.
The laminator automatically draws in the laminating foil and discharges it on the
output side.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia A 235 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 235 Plus in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info