644753
17
Zoom out
Zoom in
Previous page
1/84
Next page
Hot Lamination
Laminator A 235 Plus
17
Hot Lamination
During hot lamination, the laminating foil is heated to a temperature of up to 105°C
as it passes through the laminator rollers. This creates a permanent thermal bond
ing of the laminated material and the laminating foil. Hot lamination permanently
prevents the laminated material from coming into contact with water, oxygen and
bacteria.
Only use laminating foil which is suitable for hot lamination. For an opti
mum lamination result, we recommend laminating foils from Olympia Busi
ness Systems GmbH, which are available from specialist retailers.
1. Stand the laminator securely on a level, horizontal surface.
Make sure the ON/OFF switch is switched to OFF before plugging the lam
inator into a power socket.
2. Plug the laminator cable into an available power socket.
3. Switch the ON/OFF switch to ON and the COLD/HOT lamination switch to
HOT. The red POWER indicator lamp lights up.
4. The drive motor for the rollers starts up. The optimal operating temperature is
reached after approx. 3 - 4 minutes and the green READY indicator lamp lights
up.
5. Place the material to be laminated inside the laminating foil. For an optimal
lamination result, leave a space of 3 to 5 mm between the edges of the docu
ment and edges of the foil on all sides.
CAUTION!
Danger of burns due to hot machine surface!
During hot laminating, the machine surface heats up.
Do not touch the machine surface during laminating operation. Wait a few
minutes after laminating until the machine has cooled down before you
touch it.
If the material to be laminated is not a standard format, also place an insert
inside the laminating foil that corresponds with the format of the laminating
foil. Place the material to be laminated at the front edge of the closed end
of the laminating foil.
6. Feed the prepared laminating foil with the closed side first, keeping it straight,
into the infeed of the laminator.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia A 235 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 235 Plus in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info