812275

Olsberg Virgo Manual

14
Zoom out
Zoom in
Previous page
1/44
Next page
14
Operation
Permissible fuels
The following fuels are approved:
●Natural shopped wood in the form of billet wood
Maximum length: ..............33 cm
Circumference: ....approx. 30 cm
●Lignite briquettes
Billet wood reaches a moisture content of 10 to 15%
after being stored outdoors for 2 to 3 years (only cov-
ered at the top) and is then ideally suited for heating.
Freshly cut wood has a very high moisture content
and so burns badly. Apart from the very low calorif-
ic value it is also harmful for the environment. The in-
creased condensate and tar formation can lead to re-
place and chimney sooting.
This diagram shows that the consumption rate with
freshly-felled wood (caloric value 2.3 kWh/kg) is al-
most twice as high as the consumption rate with dry
wood (caloric value 4.3 kWh/kg).
Moisture [%]
dry wood that has been stored for at least 2 years
Caloric value [kWh/kg]
freshly-felled wood
You will only achieve optimum combustion and heat
in an environmentally friendly way with these fuels.
Adding the fuel in small quantities avoids unnecessary
emissions. Clean burning can be identied by the fact
that the rebrick becomes a light colour.
According to the German Federal Immission Control
Act, it is forbidden e.g. to burn the following fuels in
stoves:
●Moist wood or wood treated with wood
preservatives
●Sawdust, chippings, grinding dust
●Bark and chipboard waste
●Slack coal
●Other wastes
●Paper and cardboard (except for igniting)
●Straw
Please note before heating for the rst time
●Remove all accessories from the ash pan and com-
bustion chamber.
●The odour given off by the evaporation of the pro-
tective coating disappears after the stove has been
burning for several hours (ventilate the room well).
●The stove has a high quality temperature resistant
coat, which does not achieve its nal strength un-
til the stove has been heated for the rst time. You
should therefore never leave anything on the stove
and not touch the surfaces as the paint coat could
otherwise be damaged.
●As soon as the kindling material has burned down,
put on 2 burnouts consisting of 3 kg wood ensuring
that the temperature resistant coating reaches its -
nal rmness.
Igniting
● Before ignition, check that no ammable objects are
placed on the stove.
●Empty the ash pan if necessary and slide back in.
●Open the primary and secondary air controller.
●Place the ignition material (ignition cubes and dry,
smaller ignition wood) and ignite it.
●Close the door to the combustion chamber so that
the kindling material can catch re.
●As soon as the igniting material is burning, add a
quantity of fuel corresponding with the required heat
(see chapter “heating”).
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg Virgo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Virgo in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info