Manual Olsberg Virgo (page 12 of 44) (English, German, Dutch, French, Spanish)

812275

Zoom out

Zoom in

1/44

Installing the stove

The oor on which the stove is installed must be even

and horizontal. The stove may only be installed on an

adequate load-bearing oor. The stove can be stood

on a metal oor sheet or glass sheet to protect the

ooring.

If the ooring or carpet is inammable, a stable and

non-combustible spark protection plate must be used.

This must extend 50 cm to the front and 30 cm to each

side beyond the edge of the combustion chamber

opening. Under the stove no spark protection plate is

required.

Stove rotating

The stove is delivered with the arrest engaged

(non-rotating). If the stove should rotate, the arrest on

the underside of the footrest must be unscrewed and

removed (see Fig.2).

Attention: Only with the top connection can the stove

be rotated via the footrest in 5 stages, 45°

to the left and the right.

Fig.1 Footrest

Fig.2 Arrest

Minimum distance

from combustible or load-bearing walls

There must be no objects made of combustible materi-

als within a distance of 100 cm of the stove’s radiation

area, measured from the combustion chamber’s in-

spection glass, nor may any be placed within this area

subsequently.

Depending on whether the stove is installed with the

arrest engaged (non-rotating) or rotating, different min-

imum wall distances that must be complied with apply,

based on the position of the combustion chamber door

to the set-up wall or side wall (see Fig. 3 to 6).

Stove with arrest engaged

The wall distances for non-rotating installation are pre-

sented below.

25 cm

40 cm 40 cm

100 cm

Fig.3 Stove with arrest engaged,

installed straight in corner

25 cm

100 cm

Fig.4 Stove with arrest engaged,

installed diagonally in corner

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Virgo in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olsberg Virgo Manual

Product: