Manual Olsberg Tolima Aqua II Compact (page 19 of 44) (English, German, Dutch, French)

707630

Zoom out

Zoom in

1/44

Water Installation

Important

● The respective locally-applicable regulations and

rules must be observed.

● The installation of water connections and all electri-

cal work must be completed by certied specialists.

● We recommend using the following Olsberg com-

ponents for connecting the respective items to the

heating and/or industrial water system:

- Installation unit

- Temperature difference controller

Please follow the separate assembly and operation

instructions for these components.

● According to EN 12828 a safety relief valve with a

xed response pressure setting of 2.5 bar (Flamco,

type Prescor or Calef, model series 311, 312, 313,

314, 513 or 514) needs to be installed on site to en-

sure that the operating pressure will not exceed the

maximum of 2.5 bar.

● In addition to the requisite safety components, a re-

turn ow booster valve must be installed, which in-

creases the return ow temperature to at least 55°C

(the Olsberg “Installation unit” includes such a valve).

● The stove must never be operated without water.

● The oven must never be operated without a correct-

ly-installed and functional “Thermal discharge safety

device” (TAS). Preparations also require that a lter

be installed upstream from the TAS.

● An outlet valve must be installed in the lower section

of the water circulation system.

● To keep the stove and, in particular, the „Thermal

discharge safety device (TAS)” in fully operational

condition, it is essential that the heating system be

cleaned by ushing as specied in DIN EN 14336

(Heating systems in buildings - Installation and com-

missioning of water-based heating systems) before

the stove is connected hydraulically.

Olsberg cannot process any warranty claims unless

provided with proof that the necessary cleaning has

been carried out.

● An inspection must be carried out once a year to de-

termine whether the “Thermal discharge safety de-

vice” (TAS) is working properly. A press on the red

button at the valve releases the ow. Check and

clean the lter at the cooling water inlet at least once

a year.

Thermal discharge safety device (TAS)

The TAS inlet must be connected to the building’s cold

water system; water from the TAS outlet must be al-

lowed to ow directly into the drain.

The TAS must prevent the heater from overheating

when the heat being generated cannot be removed by

the water. Overheating would cause impermissibly high

temperatures and pressures which would result in ir-

reparable consequences for the stove. In order to pre-

vent this, the TAS’ safety valve will open depending on

the water temperature in the stove’s heat exchanger

(sensor pocket for TAS) to allow cold tap water to re-

move the heat.

Do not add any more wood in the event of any such

malfunctioning.

Installation of the water connections

● The water pipes can be laid through the oor or

through the back panel. When connecting the pipes

at the rear, the prestamped holes in the paneling for

water connections should be punched out.

● A pipe disconnector must be tted in the cold wa-

ter pipe leading to the TAS due to the fact that the

standing water in the TAS inlet is „stagnant“.

● After installing the water connections vent the sys-

tem at the ventilating valve of the stove (Fig. 4).

Fig. 4 Ventilating valve

● Check all water connections on the stove for leaks.

● Screw the paneling for water connections on the

back panel.

TAS

inlet

1/2“

TAS

exit

1/2“

Return

ow heater

3/4“

Heating

inlet

3/4“

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Tolima Aqua II Compact in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olsberg Tolima Aqua II Compact Manual

Product: