744289

Olsberg Inara Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Fig.2 Panel Lower rear wall
Hose clamp
Fig.3 Screws combustion air duct
Fig.5 Combustion air damper screwed on
at the bottom
Installation sequence
If you want to install other accessories in addition to
the combustion air damper, e.g. a GSM module, you
always need to install the combustion air damper rst
for reasons of accessibility. For the same reason, you
can only mount the side panels after you are nished
installing the combustion air damper.
● Dismount the lower rear wall and panel (Fig.2).
● Release the hose clamp on the combustion air line
and remove the combustion air duct (Fig.3).
● Wire the plugs as follows before installing the com-
bustion air damper:
a) Connect plug „19“ onto position „S19“ of the main
circuit board (see connection diagram in the lower
rear wall / instruction manual of the pellet stove).
b) Connect plug „S5“ onto position „S5“ of the main
circuit board.
c) Connect plug „L-Dauer“ (“L continuous“) onto plug
„L-Dauer“ (“L continuous“) of the appliance‘s wir-
ing harness.
● Insert the duct of the combustion air damper into the
combustion air line and re-tighten the hose clamp.
● Screw the combustion air damper on at the rear
(Fig.4) or at the bottom (Fig.5) of the appliance.
● Route the cables in such a manner that no hot sur-
faces are touched.
● After installing the combustion air damper, avoid
damage to the cables by making sure that they do
not rest against the rotating assembly of the motor.
● Activate the combustion air damper and check it for
faultless function (see the following chapters).
● Remount the panel and lower rear wall.
● If the combustion air damper was screwed on at
the bottom, the hole in the lower rear wall for the
combustion air connection at the back needs to be
sealed with a cover and screws (are included with
the pellet stove).
Fig.4 Combustion air damper screwed on
at the rear
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg Inara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Inara in the language / languages: English, German, French as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olsberg Inara

Olsberg Inara Additional guide - English, German, French - 8 pages

Olsberg Inara Installation Guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info