812264

Olsberg ARINA 2.0 Manual

89
Zoom out
Zoom in
Previous page
1/160
Next page
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
Regular cleaning of the combustion chamber, in particular the
burner trough and the ash pan, is essential for fault-free operation
of the pellet replace.
Warning! Serious personal injury and property damage!
●Always carry out cleaning while the pellet replace is cold!
Warning! Serious personal injury and property damage!
●Do not clean the pellet replace with water! Water pene-
tration can bridge contacts and cause a short circuit and/or
electric shock!
●Use only a suitable ash vacuum!
●Do not use aggressive cleaning agents!
Necessary activities How often? Aids, tools and procedures
●Visual inspection of the burner trough for waste
accumulation
Daily ū No tools required
●Scrape residues out of the burner trough As required ●Open the inspection door.
●Unlock the lock below the rebox door and open the rebox door.
●Remove the burner tray and scrape out any residues.
●Check connector for possible rust and ash deposits
and clean it
Regularly, min. 1 x
per year
ū Cloth
ū Hand brush
ū Vacuum cleaner
●Clean the combustion chamber As required ●Remove the burner trough for cleaning of the combustion chamber.
●Visual inspection (the ash pan should be max. 3/4
lled)
Daily ●To clean the ash box, open the inspection door.
●Release the ash box lock, pull out the ash box to the front and empty
the cooled ash. (See also the warning notice above)
●Cleaning the ue gas draughts Once a week ●Operate the cleaning slide 3-5 times.
●Then pull out the ash box to the front and vacuum out the draughts in
the right and left corners underneath the ash box compartment using
an ash vacuum cleaner and a pointed nozzle.
●Repeat the procedure if the stove is very dirty.
●Clean the glass panes Min. 1 x per year ●Wet a slightly damp cloth with cooled ash and remove dirt, wipe with a
clean cloth (repeat the process if necessary).
●Clean coated surfaces As required ū We recommend cleaning the coated surfaces with a slightly damp mi-
crobre cloth while they are cold because they are very sensitive.
●Visual inspection for surface damage Regularly ū Visual approach
●Clean the pellet reservoir, remove wood dust/pellet
dust, otherwise these may block the screw conveyor!
After approx. 20
bags of pellets
ū Cloth
ū Hand brush
ū Vacuum cleaner
4.1 Cleaning and care by the user
Care and maintenance
Cleaning and care information for the user
We reserve the right to make technical changes
89
4 Cleaning, care and maintenance
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 8978-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 89 11.04.2023 14:42:0011.04.2023 14:42:00
… 89 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg ARINA 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg ARINA 2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 34.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info