812264
75
Zoom out
Zoom in
Previous page
1/160
Next page
Operating manual
for the user
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
Warning! Risk of serious personal injury,
property damage and/or environmental damage!
The pellet replace may only be red with pellets which
comply with DIN EN 14961-2 and the DIN-plus certication
programme or the Austrian standard M 7135: Max. moisture
10%, max. diameter 6 mm, max. length 30 mm!
Store pellets in a dry and dust-free location!
Do not allow any materials other than the pellets specied
above to get into the burner trough! Burning other amma-
ble materials or waste causes damage to the pellet replace
and results in invalidation of the warranty!
Never use ammable liquids such as petrol, lamp oils simi-
lar to petrol, petroleum, relighters, or similar liquids to kin-
dle or “reignite a re! And make sure that such liquids are
a sucient distance away from the pellet replace during
operation!
Pellets may never be manually placed into the burner
trough, with the following exceptions: during recommis-
sioning and if the reservoir runs empty, a handful of pellets
must be poured into the burner trough towards the ignit-
er. Otherwise, only the pellet duct will be lled within the
lling period in the start phase and only an insucient 2-5
pellets will fall into the burner trough.
Fig. 3.6 Never use ammable liquids and maintain a sucient distance
from ammable liquids
Fig. 3.7 Do not manually pour pellets into the burner trough except
during recommissioning and if the tank runs empty
Attention! Damage to the surface of the coating!
The pellet fireplace is coated with a high-quality tempera-
ture-resistant coating which only reaches its final strength
after being heated for the first time.
You therefore should not place anything on the tiled pel-
let replace or touch the surfaces as this may damage the
coating!
Never place the pellet sack on the hood!
Make sure that packaging does not touch the hot surfac-
es when pouring in pellets as the packaging residue can be-
come burned into the surface of the coating!
innovativ. seit 1577
Fig. 3.8 Do not place the pellet sack on hot surfaces while lling
We reserve the right to make technical changes
75
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 7578-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 75 11.04.2023 14:41:5611.04.2023 14:41:56
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg ARINA 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg ARINA 2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 34.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info