812264

Olsberg ARINA 2.0 Manual

62
Zoom out
Zoom in
Previous page
1/160
Next page
Installation instructions
for the specialist company
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
2.7 Installation
Installing the exhaust pipe
●Fit the pipe lining (on site) into the chimney!
The connection height can be determined individually, but
should not exceed 1.5 m from the connection.
●Make sure there is a distance of at least 95 mm between the ue
pipe and ammable elements!
●Plug the exhaust pipe (on site) into the pellet replace’s Ø 80 mm
connection!
●Push the pellet replace into the intended place of installation
and adjust the pellet replace such that the exhaust pipe ts into
the pipe lining (see also the subsection: “Adjusting the pellet re-
place with the height-adjustable feet”)!
●The exhaust pipe connection must be sealed.
●Elbows with a cleaning opening must be used in order to be able
to clean the connecting line.
●The exhaust pipe may not protrude into the chimney.
Please note that a temperature of 85 °C can be reached at the parti-
tion walls in accordance with test specication EN 13240 and this
can result in colour changes in light wallpapers or similar ammable
building materials.
Fig. 2.14 Plug the exhaust pipe (on site) into the connection
Installing the balanced ue combustion air line (optional)
●Plug the Ø 80 mm combustion air line into the combustion air
nozzles (optional) if the combustion air should be supplied not
from the room in which it is installed but rather independently
from the room air via a line!
●Attach the Ø 80 mm combustion air line to either the rear or the
bottom of the pellet replace!
●Insulate the combustion air line with suitable insulating materi-
al because condensation can occur on the combustion air line in
very low outdoor temperatures!
●The combustion air line may not be connected during operation!
Fig. 2.15 Plug the Ø 80 mm combustion air line into the rear
Conversion of combustion air nozzles for connection from the
bottom
●Remove the lower back wall and panel!
●Unscrew the combustion air nozzles!
●Screw the combustion air nozzles onto the base plate.
●Install the panel and lower back wall again.
●Use the enclosed cover and screws to close the hold in the bot-
tom of the rear wall for the combustion air connection!
311x
Fig. 2.16 Remove the lower back wall and panel
62
We reserve the right to make technical changes
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 6278-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 62 11.04.2023 14:41:4511.04.2023 14:41:45
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg ARINA 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg ARINA 2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 34.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info