16706
28
Zoom out
Zoom in
Previous page
1/64
Next page
4
4. Press the key
until the display shows:
CONTRAST: NORMAL
5. To view the other available options: "DARK" and "LIGHT",
press the keys:
/
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
The contrast should be regulated on the basis of the follow-
ing criteria:
NORMAL, if the document is neither very light nor very dark.
"NORMAL" appears on the bottom line of the display.
LIGHT, if the document is dark. "LIGHT" appears on the bottom
line of the display.
DARK, if the document is light. "DARK" appears on the bottom
line of the display.
TO ADJUST THE RESOLUTION
1. Press the key
until the desired resolution value appears on the display.
The resolution should be regulated on the basis of the fol-
lowing criteria:
STD (STANDARD), if the document contains easily legible char-
acters. An "arrow" appears on the bottom line of the display in line
with the "
" symbol printed on the console.
FINE, if the document contains very small characters or draw-
ings. An "arrow" appears on the bottom line of the display in line
with the "
" symbol printed on the console.
HALF TONES, if the document contains shaded areas.
An "arrow" in line with the "
" symbol and an arrow in line with
the "
" symbol printed on the console appear on the bottom line
of the display.
TO SEND A DOCUMENT
1. Insert the document in the ADF or the manual document
feeder.
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: "NOR-
MAL".
The initial resolution value is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
2. To dial the number of the correspondent to whom you wish
to send the document, press the keys:
-
Your correspondent’s number may be made up of max. 64
digits.
3. To start sending the document, press the key:
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
note
If you have entered any incorrect digits: move the cursor, using the
/ keys, to the incorrect digit and overwrite it with the correct
one; if you want to delete the number altogether, press the
key.
note
If you want you can dial the correspondent’s number using the quick
dialling procedures, see "To set one-touch and speed dialling",
"To send a document with one-touch dialling" and "To send a
document with speed dialling".
note
If you want to abort the transmission in progress, press the
key. The fax machine unloads the document from the ADF and returns
to its initial stand-by mode.
If the document to be removed consists of more than one sheet, before
pressing
to unload the first, remove all the others by hand.
TO HEAR THE DIALLING TONE WHEN SENDING A DOCUMENT
1. Insert the document in the ADF or the manual document
feeder.
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
2. To hear the dialling tones, press the key:
The display shows:
OFF HOOK
and the length of the transmission in minutes and seconds in
the top right-hand corner.
3. To dial the number of the correspondent to whom you wish
to send the document, press the keys:
-
Your correspondent’s number may be made up of max. 64
digits.
4. As soon as you hear the tone of your correspondent’s fax
machine, press the key:
Transmission is started. The message "CONNECTING"
appears on the display.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti LAB_S120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti LAB_S120 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti LAB_S120

Olivetti LAB_S120 User Manual - German - 64 pages

Olivetti LAB_S120 User Manual - Dutch - 64 pages

Olivetti LAB_S120 User Manual - Danish - 64 pages

Olivetti LAB_S120 User Manual - French - 64 pages

Olivetti LAB_S120 User Manual - Italian - 64 pages

Olivetti LAB_S120 User Manual - Portuguese - 64 pages

Olivetti LAB_S120 User Manual - Swedish - 64 pages

Olivetti LAB_S120 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info